Insta360 Dive Buddy

Let the Underwater Scene Take Centre Stage Put more of the dive in the frame while giving the camera a viewpoint of its own. Insta360 Dive Buddy is an adjustable-buoyancy support for compatible X Series cameras in their appropriate dive housings. Tune the weight plates and handle position for the assembled setup, or attach the included underwater tripod for a supported angle. It offers a considered way to capture third-person underwater footage, with the camera position prepared around the water conditions and the planned scene. Highlights Adjustable-buoyancy support for compatible X Series camera-and-case setups. Current manufacturer support includes X6, X5, X4 Air, X4 and X3. Tune the weight plates and handle position for neutral buoyancy. Manufacturer-specified maximum depth of 50 m. Included underwater tripod supports alternative static positions. Supplied wrist strap and 1/4-inch mounting points. Key Features Give the Camera an Underwater Viewpoint A correctly balanced setup can hover in the water while a compatible 360 camera records the surrounding scene. This creates another approach to third-person filming without keeping the camera in your hand throughout the shot. Dive Buddy provides buoyancy and mounting adjustment rather than powered propulsion, so the water conditions and preparation remain part of achieving the intended position. Balance the Complete Camera Setup Adjust the number of weight plates and the handle position to suit the camera, its dive housing and the water. The illustrated guide separates seawater and freshwater configurations, then describes fine adjustment after entering the water. Check the complete assembly rather than treating one setting as universal, particularly when using a camera or housing not shown in a specific setup table. Keep Adjustment Within the Marked Range The handle includes marked scale positions for buoyancy adjustment. Follow the guide and do not rotate it below red scale line 3 underwater, as this can allow water to enter the support. Release trapped air and check the resulting buoyancy before relying on the position. These preparation steps help keep the intended balance consistent with the actual camera rig. Choose a Supported Static Angle The included underwater tripod can connect to the appropriate 1/4-inch mounting point for the illustrated inclined or vertical arrangement. Unfold the tripod and position the stabiliser fin as instructed. Choose a suitable location without disturbing marine life or fragile surroundings, and check stability before leaving the camera to record. Keep Hold When It Is Not Filming Attach the supplied wrist strap to the bottom mounting point and wear it when holding the support or when the setup is not in use. Be aware of currents and maintain control during preparation and adjustment. Neutral buoyancy is a balance achieved for the assembled equipment; it is not a guarantee that the camera will remain fixed in moving water. Prepare the Rig for Its Next Session After use in seawater, remove the camera and soak Dive Buddy in clean water for at least 15 minutes, then dry it with a soft cloth before storage. Keep it in a dry, ventilated location and avoid impacts that could affect its operation. The camera, suitable dive housing and any selfie stick are separate, with each component's operating limits respected. Summary Insta360 Dive Buddy brings adjustable buoyancy and practical mounting choices to a compatible underwater 360 setup. Balance the camera and its correct dive case, observe the marked adjustment range and keep control around currents. Use its hovering or tripod arrangements to plan a different view of the underwater scene. Frequently Asked Questions Which Cameras Are Compatible?ExpandCollapse The current manufacturer list includes Insta360 X6, X5, X4 Air, X4 and X3. Use the appropriate dive housing for the camera and follow the current configuration instructions. The camera and dive case are not included. Do not assume a weight-plate setting for one camera is correct for another. Does Dive Buddy Move Like a Powered Drone?ExpandCollapse It provides adjustable buoyancy and camera support, rather than powered propulsion or automatic tracking. Tune the weight plates and handle position for the assembled camera and housing. Currents and trapped air affect the result, so check the balance and keep control of the equipment. What Is Its Maximum Depth?ExpandCollapse The manufacturer specifies a maximum depth of 50 m for Dive Buddy. The camera, housing and every attached accessory must also suit the intended depth. Follow the lowest operating limit in the complete setup; a deeper-rated camera case does not increase Dive Buddy's own limit. Can It Be Used on the Seabed?ExpandCollapse The included underwater tripod supports the illustrated inclined or vertical static arrangements through the appropriate 1/4-inch mounting point. Select a suitable stable position, follow the guide and avoid contact with fragile marine life or surfaces. What Is Included and How Is It Cleaned?ExpandCollapse The package includes Dive Buddy, a weight-plates set, an underwater tripod and a wrist strap. After seawater use, remove the camera, soak Dive Buddy in clean water for at least 15 minutes and wipe it dry before storage. The camera, dive housing and selfie stick are separate. 더 보기