Insta360 Bullet Time Selfie Stick 2.0

Change the View with a Turn of the Handle Move from an extended selfie-stick shot to a circling Bullet Time sequence with one purpose-designed accessory. Insta360 Bullet Time Selfie Stick 2.0 combines a telescopic support with an integrated rotating component, so the two shooting approaches do not require a separate Bullet Time handle. Three defined angle positions and an extendable design give a compatible 360 camera more ways to frame a person, a group or the surrounding scene. Highlights Integrated Bullet Time component and extendable selfie stick. Three defined shooting angles of 65°, 75° and 90°. Extends from 29.7 cm to a maximum of 120 cm. Designed for compatible 360-camera footage and supported Bullet Time modes. Bottom 1/4-inch mounting point, with a maximum mounted load of 300 g. Key Features Keep Two Shooting Approaches in One Accessory The integrated Bullet Time component and telescopic stick support both ordinary selfie-stick positioning and the intended circling-camera technique. Change the component’s position and secure its locking knob before recording. This avoids carrying a separate Bullet Time handle for this product’s supported setup; the camera and its required shooting mode remain separate parts of the workflow. Choose from Three Defined Angles Set the rotating component into the 65°, 75° or 90° position and check that it snaps securely into the corresponding notch. These deliberate stops provide different arrangements for the shot. They are fixed positions rather than an unrestricted angle adjustment, so choose the one that suits the camera orientation and available space. Frame a Third-Person 360 View With a compatible 360 camera and the correct alignment, the stick can be removed by the camera’s stitching process for a third-person perspective. Keep the equipment stable and follow the camera’s recommended orientation. The effect depends on the camera, lens mode and composition; an ordinary wide-angle view should not be expected to hide the support in the same way. Pack Short and Extend When Needed The stick retracts to 29.7 cm for carrying and extends up to 120 cm when the scene calls for more reach. Its aluminium-alloy structure, plastic and silicone components have a published total weight of 250 g. Set the extension and tighten the locking component before mounting or moving the camera, and keep the combined mounted load within 300 g. Prepare the Camera for Bullet Time For the intended circling effect, use a compatible camera’s Bullet Time mode and follow the guide’s lens orientation. Hold the handle securely and rotate at a consistent speed in a clear area. The manufacturer recommends approximately one rotation per second. Check the camera mode and the complete mounting connection before starting the sequence. Use the Mounting Point Within Its Limits A 1/4-inch mounting point at the base supports suitable additional arrangements, but the manufacturer excludes adding accessories during high-intensity activities. For water use, the current stick guide permits fresh water and excludes seawater for this model. Drain water through the handle’s bottom opening and dry the stick completely before storage. Summary Insta360 Bullet Time Selfie Stick 2.0 brings a rotating handle and extendable 360-camera support together in one compact accessory. Choose the shooting position, secure the fittings and match the camera mode to the intended effect. It offers a practical way to move between third-person framing and a prepared Bullet Time sequence without a separate rotating handle. Frequently Asked Questions Which Cameras Are Supported?ExpandCollapse The current manufacturer offer lists X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE X and ONE R. Bullet Time and invisible-stick results require the appropriate compatible 360 camera or 360 lens setup and supported camera mode. A listed camera family does not make an ordinary wide-angle lens produce the same effect. Do I Need a Separate Bullet Time Handle?ExpandCollapse No separate Bullet Time handle is needed for this product’s intended arrangement because the rotating component is built into the stick. The package contains one Bullet Time Selfie Stick 2.0. A compatible camera is supplied separately. Can I Choose Any Rotation Angle?ExpandCollapse The guide provides three defined positions: 65°, 75° and 90°. Align the component with the chosen notch, snap it into place and secure the setup before recording. It is not an unrestricted angle-adjustment mechanism. Can It Be Used in the Sea?ExpandCollapse The current manufacturer underwater-use guide excludes seawater for Bullet Time Selfie Stick 2.0, while permitting fresh water. After fresh-water use, drain water through the handle’s bottom opening and allow it to dry completely before storage. The camera retains its own water-use requirements. What Load Can It Carry and Can I Add Accessories?ExpandCollapse The maximum mounted load is 300 g, including the camera and anything attached to it. There is a 1/4-inch mounting point at the bottom, but the manufacturer says not to use additional accessories during high-intensity activities. Check all fittings and keep the area clear before a circling shot. 더 보기