Insta360 Ace Pro 2 2-in-1 Flash and Fill Light
More Control Over Light, On And Off Camera The Insta360 2-in-1 Flash and Fill Light gives Ace Pro 2 creators two ways to shape a scene. Use a Bluetooth-connected flash for supported still-photo modes, or continuous fill lighting for a steady light source. Automatic TTL flash metering, manual brightness settings and four fill-light colour temperatures let you work with different surroundings. A rear magnet and the supplied cold shoe adapter offer flexible placement without turning a compact camera kit into a studio rig. Highlights TTL automatic flash and manual flash settings for supported photo modes Continuous fill lighting with four colour temperatures and four brightness levels Manufacturer-stated flash range up to 3 m Rear magnetic mounting and supplied cold shoe adapter Built-in rechargeable battery and waterproofing rated to 13 m Key Features Flash For Supported Still Photos Pair the light with Ace Pro 2 over Bluetooth and use flash in Photo or Interval mode. TTL metering adjusts flash intensity to the scene, while manual mode offers four brightness levels when you want more deliberate control. The manufacturer states a flash range up to 3 m; actual illumination depends on the subject, distance and surroundings. Continuous Light For A Different Look Switch to fill-light mode for continuous illumination rather than a flash pulse. Choose 2500 K, 4500 K, 5500 K or 6500 K and adjust through four brightness levels to work with the room or available light. The supplied diffuser softens the light for close portraits and sustained supplementary lighting. Position The Light Where It Helps The rear magnet attaches to suitable magnetic surfaces for off-camera placement. For camera-mounted use, the cold shoe interface and adapter work with compatible accessories, including the Xplorer Grip Pro Kit and the Ace Pro 2/Ace Pro Utility Frame. Confirm a secure fit, use the supplied pads when required and avoid high-intensity activities that could dislodge the light. Rechargeable And Ready For Outdoor Use A built-in 600 mAh lithium-ion battery powers the unit, and the supplied charging cable connects to a 5 V / 1 A power source. The light is rated waterproof to 13 m and operates from 0 °C to 45 °C. This rating applies to the light itself; the camera and every other accessory must meet the conditions of the complete setup. Connected Control With Clear Limits Use the camera’s Bluetooth Remote menu to pair with Insta360 Flash, and keep the camera, app and light firmware current. Pairing a Bluetooth remote may disconnect the Flash, so do not assume that Flash and remote control can be used together. Avoid prolonged repeated flash firing, and keep the magnets away from pacemakers and susceptible devices. Summary The 2-in-1 Flash and Fill Light is a versatile lighting companion for Ace Pro 2, combining automatic or manual flash with adjustable continuous illumination. Use the supplied mounting and diffusion accessories to tailor a compact setup for portraits, travel scenes and controlled low-light shooting. Frequently Asked Questions Does The Flash Work While Recording Video?ExpandCollapse Flash mode is supported in Photo and Interval modes after pairing with the camera. For a continuous light source during video recording, use fill-light mode instead. Can I Adjust The Colour And Brightness?ExpandCollapse Yes. Fill-light mode offers four brightness levels and colour temperatures of 2500 K, 4500 K, 5500 K and 6500 K. Flash mode offers TTL automatic exposure or four manual brightness levels. Can I Use It Away From The Camera?ExpandCollapse Yes. The rear magnet allows placement on suitable magnetic surfaces, and the supplied adapter offers a cold shoe connection. Check that it is secure and avoid high-intensity movement. Keep magnets away from pacemakers and other susceptible equipment. Is It Waterproof?ExpandCollapse The light is rated waterproof to 13 m. This is the light’s rating, not an increased rating for the camera, charging equipment or complete rig. Follow the manufacturer’s preparation and care instructions for every part of the setup. What Is Included?ExpandCollapse The package includes the light, a diffuser, charging cable, cold shoe adapter, two cold shoe pads and a carry bag. The Ace Pro 2 camera, grip, frame, dive case and power adapter are sold separately.
Pickup available at 3005, Ubi Avenue 3, #01-88
일반적으로 2~4일 후 준비 완료
Insta360 Ace Pro 2 2-in-1 Flash and Fill Light
제품 설명
More Control Over Light, On And Off Camera
The Insta360 2-in-1 Flash and Fill Light gives Ace Pro 2 creators two ways to shape a scene. Use a Bluetooth-connected flash for supported still-photo modes, or continuous fill lighting for a steady light source. Automatic TTL flash metering, manual brightness settings and four fill-light colour temperatures let you work with different surroundings. A rear magnet and the supplied cold shoe adapter offer flexible placement without turning a compact camera kit into a studio rig.
Highlights
- TTL automatic flash and manual flash settings for supported photo modes
- Continuous fill lighting with four colour temperatures and four brightness levels
- Manufacturer-stated flash range up to 3 m
- Rear magnetic mounting and supplied cold shoe adapter
- Built-in rechargeable battery and waterproofing rated to 13 m
Key Features
Flash For Supported Still Photos
Pair the light with Ace Pro 2 over Bluetooth and use flash in Photo or Interval mode. TTL metering adjusts flash intensity to the scene, while manual mode offers four brightness levels when you want more deliberate control. The manufacturer states a flash range up to 3 m; actual illumination depends on the subject, distance and surroundings.
Continuous Light For A Different Look
Switch to fill-light mode for continuous illumination rather than a flash pulse. Choose 2500 K, 4500 K, 5500 K or 6500 K and adjust through four brightness levels to work with the room or available light. The supplied diffuser softens the light for close portraits and sustained supplementary lighting.
Position The Light Where It Helps
The rear magnet attaches to suitable magnetic surfaces for off-camera placement. For camera-mounted use, the cold shoe interface and adapter work with compatible accessories, including the Xplorer Grip Pro Kit and the Ace Pro 2/Ace Pro Utility Frame. Confirm a secure fit, use the supplied pads when required and avoid high-intensity activities that could dislodge the light.
Rechargeable And Ready For Outdoor Use
A built-in 600 mAh lithium-ion battery powers the unit, and the supplied charging cable connects to a 5 V / 1 A power source. The light is rated waterproof to 13 m and operates from 0 °C to 45 °C. This rating applies to the light itself; the camera and every other accessory must meet the conditions of the complete setup.
Connected Control With Clear Limits
Use the camera’s Bluetooth Remote menu to pair with Insta360 Flash, and keep the camera, app and light firmware current. Pairing a Bluetooth remote may disconnect the Flash, so do not assume that Flash and remote control can be used together. Avoid prolonged repeated flash firing, and keep the magnets away from pacemakers and susceptible devices.
Summary
The 2-in-1 Flash and Fill Light is a versatile lighting companion for Ace Pro 2, combining automatic or manual flash with adjustable continuous illumination. Use the supplied mounting and diffusion accessories to tailor a compact setup for portraits, travel scenes and controlled low-light shooting.
Frequently Asked Questions
Does The Flash Work While Recording Video?
Flash mode is supported in Photo and Interval modes after pairing with the camera. For a continuous light source during video recording, use fill-light mode instead.
Can I Adjust The Colour And Brightness?
Yes. Fill-light mode offers four brightness levels and colour temperatures of 2500 K, 4500 K, 5500 K and 6500 K. Flash mode offers TTL automatic exposure or four manual brightness levels.
Can I Use It Away From The Camera?
Yes. The rear magnet allows placement on suitable magnetic surfaces, and the supplied adapter offers a cold shoe connection. Check that it is secure and avoid high-intensity movement. Keep magnets away from pacemakers and other susceptible equipment.
Is It Waterproof?
The light is rated waterproof to 13 m. This is the light’s rating, not an increased rating for the camera, charging equipment or complete rig. Follow the manufacturer’s preparation and care instructions for every part of the setup.
What Is Included?
The package includes the light, a diffuser, charging cable, cold shoe adapter, two cold shoe pads and a carry bag. The Ace Pro 2 camera, grip, frame, dive case and power adapter are sold separately.
사양
Insta360 Ace Pro 2 2-in-1 Flash and Fill Light
This compact rechargeable unit combines a camera-linked flash with a continuous fill light for Insta360 Ace Pro 2. The two modes have different uses: flash requires a camera connection and supported still-photo mode, while continuous lighting provides selectable brightness and colour temperature. Mount it securely using a suitable magnetic surface or the supplied cold shoe equipment. The specifications below separate lighting output, power, wireless connection and environmental limits; the light’s waterproof rating does not extend to other equipment.
| Specification | Details |
|---|---|
| Lighting And Control | |
| Compatible Camera | Insta360 Ace Pro 2 |
| Flash Modes | TTL automatic and manual; four manual brightness levels |
| Supported Flash Shooting | Photo and Interval modes; camera connection required |
| Flash Range | Up to 3 m, manufacturer stated; actual illumination depends on the scene |
| Rated Lighting Power | Flash 19.8W; continuous fill light 2.5W |
| Fill-Light Settings | Four brightness levels; colour temperatures 2500 K, 4500 K, 5500 K and 6500 K |
| Diffusion | Supplied diffuser recommended for close-up portraits and extended supplementary lighting |
| Mounting And Wireless | |
| Mounting | Rear magnet, cold shoe interface and supplied cold shoe adapter |
| Compatible Mounting Accessories | Xplorer Grip Pro Kit, Utility Frame for Ace Pro 2/Ace Pro and Dive Case for Ace Pro 2; sold separately |
| Bluetooth | Bluetooth 5.4; 2402–2480 MHz; transmitter EIRP below 10 dBm |
| Flash And Remote Use | Pairing a Bluetooth remote may disconnect the Flash; do not assume simultaneous Flash and remote control |
| Firmware Updates | Through the Insta360 app accessory settings; at least 20% battery required |
| Power And Environment | |
| Built-In Battery | 600 mAh lithium-ion |
| Charging Input | 5 V / 1 A; use included charging cable and suitable power source |
| Operating Temperature | 0 °C to 45 °C |
| Waterproof Rating | Maximum depth 13 m for the light; other equipment retains its own rating |
| Use Precautions | Avoid high-intensity activities and prolonged repeated flash firing. Keep magnets away from pacemakers and susceptible devices |
| Physical Details And Contents | |
| Dimensions | 60 × 28.1 × 33.7 mm |
| Manufacturer Weight | 48.3 g; unit weight, not packed shipping weight |
| Materials | Silicone, metal and plastic |
| In The Box | 1 light, 1 diffuser, 1 charging cable, 1 cold shoe adapter, 2 cold shoe pads and 1 carry bag |
| Sold Separately | Camera, power adapter, grip, utility frame and dive case |