Edifier T5 Powered Subwoofer 70W
A Dedicated Foundation For Low-Frequency Sound The Edifier T5 adds a separate bass cabinet to a compatible active speaker or home entertainment system. An 8-inch long-throw driver and built-in 70W RMS amplifier take care of low frequencies, while level, low-pass and phase controls help the subwoofer work with the main speakers. Its analogue Signal In and pass-through Signal Out connections support different system layouts without requiring a separate power amplifier for the subwoofer. Highlights 70W RMS powered subwoofer with an 8-inch front-firing driver. Published frequency response of 38Hz–160Hz. RCA Signal In and pass-through Signal Out connections. Adjustable volume, low-pass filtering and 0°/180° phase. MDF cabinet with a wood-grain finish and automatic standby. Key Features Give Low Frequencies Their Own Cabinet A dedicated 8-inch driver handles the bass range rather than asking compact main speakers to reproduce every frequency. The built-in Class-D amplifier supplies 70W RMS, with digital processing used for low-pass filtering and phase control. This is an addition to a suitable speaker system, rather than a full-range speaker or a replacement for the main left and right channels. Connect Through The Appropriate Line-Level Output A source or active speaker with Sub Out, Woofer Out or LFE Out can feed the T5 Signal In connection. For a suitable stereo line-level system without a dedicated subwoofer socket, the manual also describes using Signal In and the Signal Out pass-through. Check the source connections before ordering; amplified speaker-level terminals are not suitable inputs. Set The Balance Around Your Main Speakers Start with a low subwoofer level, then adjust it against the main speakers at a comfortable listening volume. The low-frequency bandwidth control sets the crossover point, while the phase switch offers 0° or 180° alignment. These adjustments help blend the bass with the existing system rather than simply adding more low-frequency output. Place The Subwoofer With The Room In Mind The MDF enclosure and wood-grain finish suit a settled desktop or room installation. Allow space for its 278 × 300 × 336mm cabinet, the side port and rear connections. Listening position and room boundaries affect the result, so it is useful to try a practical placement and refine the level before fixing the cable route. Automatic Standby For Everyday Use The subwoofer enters standby after approximately 30 minutes without a signal and wakes when playback resumes. Both the subwoofer and the main speaker system still need their own appropriate power arrangements. The supplied audio leads support the connection options shown in the manual; choose the arrangement that gives the source practical control over the complete system. Summary Choose the Edifier T5 when a compatible speaker system would benefit from a dedicated low-frequency cabinet. Its line-level connections and adjustable integration controls provide a practical upgrade route, with built-in amplification and automatic standby for everyday listening. Frequently Asked Questions Does the T5 need a separate amplifier?ExpandCollapse No. The T5 has its own amplifier and needs mains power. Your main speakers must still be active speakers or use their own appropriate amplification. Can I connect the T5 to speaker-level terminals?ExpandCollapse No. Use a suitable line-level output such as Sub Out, LFE Out or stereo Line Out. The manual specifically excludes the amplified power-output terminals of an amplifier. What is Signal Out used for?ExpandCollapse Signal Out is a pass-through connection for a compatible main active speaker system when the source feeds the subwoofer first. It is not a powered output for passive speakers. How should I set phase and crossover?ExpandCollapse Match the low-pass setting and listening level to your main speakers, then compare the 0° and 180° phase positions at the listening seat. The manual gives a step-by-step integration procedure. Does the T5 switch off automatically?ExpandCollapse It enters standby after approximately 30 minutes without an audio signal and resumes when a signal returns.
Pickup available at 3005, Ubi Avenue 3, #01-88
일반적으로 2~4일 후 준비 완료
Edifier T5 Powered Subwoofer 70W
제품 설명
A Dedicated Foundation For Low-Frequency Sound
The Edifier T5 adds a separate bass cabinet to a compatible active speaker or home entertainment system. An 8-inch long-throw driver and built-in 70W RMS amplifier take care of low frequencies, while level, low-pass and phase controls help the subwoofer work with the main speakers. Its analogue Signal In and pass-through Signal Out connections support different system layouts without requiring a separate power amplifier for the subwoofer.
Highlights
- 70W RMS powered subwoofer with an 8-inch front-firing driver.
- Published frequency response of 38Hz–160Hz.
- RCA Signal In and pass-through Signal Out connections.
- Adjustable volume, low-pass filtering and 0°/180° phase.
- MDF cabinet with a wood-grain finish and automatic standby.
Key Features
Give Low Frequencies Their Own Cabinet
A dedicated 8-inch driver handles the bass range rather than asking compact main speakers to reproduce every frequency. The built-in Class-D amplifier supplies 70W RMS, with digital processing used for low-pass filtering and phase control. This is an addition to a suitable speaker system, rather than a full-range speaker or a replacement for the main left and right channels.
Connect Through The Appropriate Line-Level Output
A source or active speaker with Sub Out, Woofer Out or LFE Out can feed the T5 Signal In connection. For a suitable stereo line-level system without a dedicated subwoofer socket, the manual also describes using Signal In and the Signal Out pass-through. Check the source connections before ordering; amplified speaker-level terminals are not suitable inputs.
Set The Balance Around Your Main Speakers
Start with a low subwoofer level, then adjust it against the main speakers at a comfortable listening volume. The low-frequency bandwidth control sets the crossover point, while the phase switch offers 0° or 180° alignment. These adjustments help blend the bass with the existing system rather than simply adding more low-frequency output.
Place The Subwoofer With The Room In Mind
The MDF enclosure and wood-grain finish suit a settled desktop or room installation. Allow space for its 278 × 300 × 336mm cabinet, the side port and rear connections. Listening position and room boundaries affect the result, so it is useful to try a practical placement and refine the level before fixing the cable route.
Automatic Standby For Everyday Use
The subwoofer enters standby after approximately 30 minutes without a signal and wakes when playback resumes. Both the subwoofer and the main speaker system still need their own appropriate power arrangements. The supplied audio leads support the connection options shown in the manual; choose the arrangement that gives the source practical control over the complete system.
Summary
Choose the Edifier T5 when a compatible speaker system would benefit from a dedicated low-frequency cabinet. Its line-level connections and adjustable integration controls provide a practical upgrade route, with built-in amplification and automatic standby for everyday listening.
Frequently Asked Questions
Does the T5 need a separate amplifier?Collapse
No. The T5 has its own amplifier and needs mains power. Your main speakers must still be active speakers or use their own appropriate amplification.
Can I connect the T5 to speaker-level terminals?Collapse
No. Use a suitable line-level output such as Sub Out, LFE Out or stereo Line Out. The manual specifically excludes the amplified power-output terminals of an amplifier.
What is Signal Out used for?Collapse
Signal Out is a pass-through connection for a compatible main active speaker system when the source feeds the subwoofer first. It is not a powered output for passive speakers.
How should I set phase and crossover?Collapse
Match the low-pass setting and listening level to your main speakers, then compare the 0° and 180° phase positions at the listening seat. The manual gives a step-by-step integration procedure.
Does the T5 switch off automatically?Collapse
It enters standby after approximately 30 minutes without an audio signal and resumes when a signal returns.
사양
Edifier T5 Powered Subwoofer 70W
The Edifier T5 adds a separate bass cabinet to a compatible active speaker or home entertainment system. An 8-inch long-throw driver and built-in 70W RMS amplifier take care of low frequencies, while level, low-pass and phase controls help the subwoofer work with the main speakers. Its analogue Signal In and pass-through Signal Out connections support different system layouts without requiring a separate power amplifier for the subwoofer.
| Specification | Details |
|---|---|
| Bass Performance | |
| Output power | 70W RMS |
| Driver | 8-inch front-firing long-throw woofer |
| Frequency response | 38Hz–160Hz |
| Signal-to-noise ratio | ≥85dB(A) |
| Amplification and cabinet | Class-D amplifier with DSP; 18mm MDF enclosure |
| Connections And Control | |
| Audio connections | RCA Signal In and Signal Out pass-through |
| Input sensitivity | 50 ±20mV |
| Adjustment | Volume, low-frequency bandwidth and 0°/180° phase |
| Source requirement | Line-level source or dedicated subwoofer output; do not connect amplified speaker-level outputs |
| Power And Placement | |
| Power | Mains-powered active subwoofer |
| Standby | Automatic standby after 30 minutes without a signal; signal-triggered wake |
| Dimensions | 278 × 300 × 336mm (W × H × D) |
| Net weight | 8.56kg |
| Supplied Items And Warranty | |
| In the box | Subwoofer, power cable, RCA-to-RCA audio cable, 3.5mm-to-RCA audio cable, quick start guide and safety instructions |
| Warranty | 1 year |