D-Link DMC-G01LC Gigabit Copper to SFP Standalone Media Converter
Extend the Network Beyond the Copper Cable The DMC-G01LC converts a copper Gigabit Ethernet connection to a separately selected supported SFP. It keeps existing copper-connected equipment in the network while providing a fibre path suited to the required route. A supported optical module determines the fibre type, connector and distance, giving the installation a deliberate choice of optical media. The compact standalone design fits smaller installations without a separate converter chassis. Fibre leads and the remote endpoint are selected for the complete link; this is a data converter rather than a PoE injector. Highlights Media Connection 1 × 10/100/1000BASE-T RJ-45 port. 1 × supported SFP slot; module selected separately. Defined by the selected SFP. Link Design Defined by the supported SFP, fibre and link budget. Full-duplex Gigabit operation. Select compatible optics at both ends. Installation 75 × 60 × 23 mm compact housing. Use the matched supplied external DC adapter. Standalone installation. 5-year warranty. Key Features Keep Copper Equipment on a Fibre Route The 10/100/1000BASE-T interface connects the local Ethernet equipment using a compliant twisted-pair cable. The optical side then carries the connection over the selected fibre route. This can extend a network between suitable locations without requiring every endpoint to have its own built-in fibre interface. Choose the Correct Optical Path A separately selected SFP establishes the wavelength, connector, fibre type and reach. Match the module to the converter’s supported operating mode and the remote optical device. The model name does not mean that an LC optical module is automatically included. Use Full-Duplex Gigabit Ethernet The converter supports a 1 Gbps link in each direction under the supported operating conditions. Manufacturer references to 2000 Mbps full-duplex transfer describe the aggregate of both directions, rather than a 2GbE port speed. The complete link is limited by its endpoints, selected media and cable installation. Install for the Size of the Site The standalone housing fits a small cabinet, distribution point or equipment location without purchasing a separate chassis. Keep the power connection, ventilation and fibre bend radius accessible for servicing. See Link Status During Troubleshooting Power and link/activity indicators provide a quick local check during commissioning and service. Verify both copper and optical sides when diagnosing a missing connection. The simple converter format keeps the media conversion role separate from the network’s routing and security policies. Complete the Connection Deliberately Select the fibre lead, remote endpoint and matched power adapter for the installation. Keep the converter within its specified environmental range and protect the fibre connectors from dust. It does not supply PoE power or replace the firewall and security controls on the surrounding network. Summary The DMC-G01LC provides a compact bridge between copper Ethernet and a selectable SFP optical connection. Match the media and remote endpoint, use the correct power adapter and test the complete link before putting it into service. Frequently Asked Questions Does It Include an Optical Transceiver?ExpandCollapse The converter has an SFP slot; the supported optical module is selected separately. What Fibre Does It Use?ExpandCollapse 1 × supported SFP slot; module selected separately. The selected SFP defines the actual fibre and connector. How Far Can the Fibre Link Run?ExpandCollapse Defined by the supported SFP, fibre and link budget. The complete optical budget includes cable, connectors, splices and the remote receiver. Does It Supply PoE?ExpandCollapse No. It carries Ethernet data without injecting PoE power. Power the endpoint separately or choose an appropriate separate PoE arrangement. Can It Be Installed in a Chassis?ExpandCollapse This is a standalone converter. Do not assume compatibility with DMC-1000 module mounting. Which Power Adapter Should I Use?ExpandCollapse Use the matched supplied external DC adapter. Do not substitute an adapter based only on connector fit. Check the device label and supplied adapter voltage before connecting power.
추가 상품 (2)
3005, Ubi Avenue 3, #01-88에서 픽업 가능
일반적으로 2~4일 후 준비 완료
D-Link DMC-G01LC Gigabit Copper to SFP Standalone Media Converter
제품 설명
Extend the Network Beyond the Copper Cable
The DMC-G01LC converts a copper Gigabit Ethernet connection to a separately selected supported SFP. It keeps existing copper-connected equipment in the network while providing a fibre path suited to the required route. A supported optical module determines the fibre type, connector and distance, giving the installation a deliberate choice of optical media.
The compact standalone design fits smaller installations without a separate converter chassis. Fibre leads and the remote endpoint are selected for the complete link; this is a data converter rather than a PoE injector.
Highlights
Media Connection
- 1 × 10/100/1000BASE-T RJ-45 port.
- 1 × supported SFP slot; module selected separately.
- Defined by the selected SFP.
Link Design
- Defined by the supported SFP, fibre and link budget.
- Full-duplex Gigabit operation.
- Select compatible optics at both ends.
Installation
- 75 × 60 × 23 mm compact housing.
- Use the matched supplied external DC adapter.
- Standalone installation.
- 5-year warranty.
Key Features
Keep Copper Equipment on a Fibre Route
The 10/100/1000BASE-T interface connects the local Ethernet equipment using a compliant twisted-pair cable. The optical side then carries the connection over the selected fibre route. This can extend a network between suitable locations without requiring every endpoint to have its own built-in fibre interface.
Choose the Correct Optical Path
A separately selected SFP establishes the wavelength, connector, fibre type and reach. Match the module to the converter’s supported operating mode and the remote optical device. The model name does not mean that an LC optical module is automatically included.
Use Full-Duplex Gigabit Ethernet
The converter supports a 1 Gbps link in each direction under the supported operating conditions. Manufacturer references to 2000 Mbps full-duplex transfer describe the aggregate of both directions, rather than a 2GbE port speed. The complete link is limited by its endpoints, selected media and cable installation.
Install for the Size of the Site
The standalone housing fits a small cabinet, distribution point or equipment location without purchasing a separate chassis. Keep the power connection, ventilation and fibre bend radius accessible for servicing.
See Link Status During Troubleshooting
Power and link/activity indicators provide a quick local check during commissioning and service. Verify both copper and optical sides when diagnosing a missing connection. The simple converter format keeps the media conversion role separate from the network’s routing and security policies.
Complete the Connection Deliberately
Select the fibre lead, remote endpoint and matched power adapter for the installation. Keep the converter within its specified environmental range and protect the fibre connectors from dust. It does not supply PoE power or replace the firewall and security controls on the surrounding network.
Summary
The DMC-G01LC provides a compact bridge between copper Ethernet and a selectable SFP optical connection. Match the media and remote endpoint, use the correct power adapter and test the complete link before putting it into service.
Frequently Asked Questions
Does It Include an Optical Transceiver?
The converter has an SFP slot; the supported optical module is selected separately.
What Fibre Does It Use?
1 × supported SFP slot; module selected separately. The selected SFP defines the actual fibre and connector.
How Far Can the Fibre Link Run?
Defined by the supported SFP, fibre and link budget. The complete optical budget includes cable, connectors, splices and the remote receiver.
Does It Supply PoE?
No. It carries Ethernet data without injecting PoE power. Power the endpoint separately or choose an appropriate separate PoE arrangement.
Can It Be Installed in a Chassis?
This is a standalone converter. Do not assume compatibility with DMC-1000 module mounting.
Which Power Adapter Should I Use?
Use the matched supplied external DC adapter. Do not substitute an adapter based only on connector fit. Check the device label and supplied adapter voltage before connecting power.
사양
D-Link DMC-G01LC Gigabit Copper to SFP Standalone Media Converter
The DMC-G01LC is a Gigabit media converter connecting 10/100/1000BASE-T copper Ethernet to 1 × supported SFP slot; module selected separately. Its optical behaviour depends on a separately selected supported SFP. The unit supports full-duplex Ethernet and provides local power and link indicators. Use a matched external power adapter and the documented installation procedure. Fibre distance is subject to the complete optical budget and the supplied hardware configuration.
| Specification | Details |
|---|---|
| Media and Interfaces | |
| Copper Port | 1 × 10/100/1000BASE-T RJ-45 |
| Optical Interface | 1 × supported SFP slot; module selected separately |
| Wavelength | Defined by the selected SFP |
| Fibre Reach | Defined by the supported SFP, fibre and link budget |
| Copper Cable | Suitable Category 5 or better channel up to 100 m |
| Duplex | Full-duplex at 1000 Mbps |
| PoE Output | Not provided |
| Operation and Installation | |
| Function | Copper-to-fibre media conversion |
| Optical Module | Selected separately; use supported SFP |
| Status LEDs | Power and Link/Activity |
| Deployment | Standalone |
| External Power | Use the matched supplied external DC adapter |
| Space Requirement | No separate chassis required |
| Physical and Environmental | |
| Dimensions | 75 × 60 × 23 mm |
| Operating Temperature | 0–40°C |
| Storage Temperature | −20–70°C |
| Humidity | Use in dry, ventilated indoor conditions |
| Warranty | 5 years |
추가 상품
