D-Link DMC-1002 SNMP Management Module for DMC-1000

Bring Compatible Media Conversion Into an Orderly Rack The DMC-1002 adds SNMP and browser-based management to a compatible DMC-1000 chassis. It monitors installed converter and power-supply status, helping administrators see link changes, module events and abnormal power conditions from a central management connection. A 10/100 Mbps Ethernet management interface and RS-232 console give defined administration paths. The module manages the chassis system; it does not act as a standalone media converter or add high-speed data ports. Highlights System Role SNMP and browser-based chassis management. 10/100 Mbps management Ethernet. RS-232 console connection. Operation Converter link and module-status monitoring. Power-supply and fan event reporting. Configuration and firmware transfer functions. Selection Exact chassis and module compatibility must match. 5-year warranty. Key Features Keep the Rack Installation Organised The module is designed for the DMC-1000 chassis, keeping its function inside the supported modular system. It avoids an improvised external installation and follows a defined position, connector arrangement and service procedure. Use the Chassis Power Architecture The management module operates as part of the compatible chassis system. A separate external UPS is required if stored-energy backup is part of the project. See the System State The module polls installed converters and power supplies, showing supported link, speed, duplex and configuration information. Traps report events such as power failures, module changes and link transitions so monitoring can follow the condition of the chassis. Service Compatible Modules Deliberately The module provides console and network administration paths for the supported chassis. Apply configuration changes to the correct slot and save a known working configuration. Converter controls are available only where the installed module supports them. Choose the Options for the Actual Links Supported functions include SNMP v1, browser management, event traps and configuration transfer. These legacy management protocols should operate on an appropriately protected management network rather than an exposed Internet interface. Keep the System Role Clear The Ethernet port is for management. It does not create an additional Gigabit data conversion path or increase the optical capacity of the installed converters. Confirm that the chassis and converter firmware support the functions required. Summary DMC-1002 SNMP Management Module for DMC-1000 is part of the compatible DMC chassis system. Specify the chassis, converter modules, power arrangement and optional management together, and follow the exact installation and service instructions. Frequently Asked Questions What Is Included?ExpandCollapse This offer supplies the DMC-1002 management module. The chassis and media converter modules are separate. Is This a Standalone Network Switch?ExpandCollapse No. It is an accessory for the compatible DMC-1000 chassis. Does It Provide Battery Backup?ExpandCollapse No. A suitable external UPS is a separate part of the power design. Redundant power supplies do not store energy. Can It Be Serviced While the Chassis Is Powered?ExpandCollapse Follow the management-module and chassis service procedure. Do not assume uninterrupted management or data service during changes. How Is the System Managed?ExpandCollapse Use the 10/100 Mbps management Ethernet connection or RS-232 console. SNMP and browser functions should be restricted to a protected management network. Will It Work With Any Media Converter?ExpandCollapse No. Confirm the exact chassis, hardware configuration and supported module before installation. 더 보기