D-Link DIS-F2010PS-E 10-Port Industrial Gigabit PoE+ Managed Switch

Industrial Connectivity With Room for the Real Installation The DIS-F2010PS-E brings 8 × 10/100/1000BASE-T ports and 2 × 100/1000 Mbps SFP slots to demanding industrial networks. Its IP40-rated metal housing, fanless cooling and −40–75°C operating range suit control cabinets, factory networks and infrastructure sites where ordinary office equipment may not be the right fit. 8 copper ports provide IEEE 802.3af/at PoE+, with up to 240 W shared power from a correctly sized DC supply. Managed VLANs, traffic priority, network redundancy and diagnostic tools help organise the installation and support fault finding. The external DC power supply is selected separately for the site, the required temperature range and any connected PoE load. Highlights Connections 8 × 10/100/1000BASE-T ports and 2 × 100/1000 Mbps SFP slots. 8 PoE+ ports and up to 240 W shared budget. Compatible optical modules are selected separately. Industrial Installation IP40 metal enclosure and fanless cooling. −40–75°C operating temperature. DIN-rail and wall-mount installation. Power and Operation Dual 48–56 VDC terminal-block inputs; alternative single 54 VDC 4-pin DIN input. External DC supply is not included. Managed switching with VLANs and traffic controls. 3-year warranty. Key Features Connect the Equipment at the Edge 8 × 10/100/1000BASE-T ports and 2 × 100/1000 Mbps SFP slots. Copper links serve nearby equipment while the available optical slots extend the installation over a fibre route selected for the site. Select the cable and endpoint speed as part of the complete connection. Power Devices With a Defined Budget Up to 8 IEEE 802.3af/at ports deliver up to 30 W per port within the 240 W shared budget. The actual available PoE power depends on the external supply, input voltage and total load. Allow headroom for connected-device start-up and cable losses. Keep the Cabinet Installation Practical The IP40 metal enclosure and fanless design suit an appropriately protected industrial cabinet. The specified −40–75°C operating range gives more installation flexibility than a standard office switch. DIN-rail or wall mounting keeps the device close to the equipment it serves. The enclosure rating is not a weatherproof or waterproof rating; use the site enclosure required for the environment. Keep Traffic Organised VLANs separate services such as production, cameras and management. QoS and multicast controls help manage competing traffic on shared links, while access controls support a more deliberate security policy. These are configured functions, so the commissioning process should match the actual applications and network layout. Support Recovery and Fault Finding Run-Ring and spanning tree provide recovery options for a properly configured topology. Loopback detection and cable diagnostics help narrow down faults in the copper network. Recovery performance depends on the design and configuration, rather than removing every possible interruption. Extend the Link With the Right Media The SFP interfaces use separately selected supported optical modules. Match fibre type, wavelengths, connector, distance and temperature rating at both ends. Extended PoE mode supports longer copper runs up to 250 m under the required operating conditions; it is not a promise of Gigabit speed over a 250 m cable. Summary The DIS-F2010PS-E combines managed industrial networking with PoE+ endpoint power and a wide operating-temperature range. Select the DC supply, installation enclosure and any optical modules for the complete site design. Frequently Asked Questions How Many Data Ports Does It Have?ExpandCollapse 8 × 10/100/1000BASE-T ports and 2 × 100/1000 Mbps SFP slots. The console is a separate management connection and is not counted as a data port. Does It Include a Power Supply?ExpandCollapse No. Select a compatible external DC supply for dual 48–56 vdc terminal-block inputs; alternative single 54 vdc 4-pin din input. The supply must also cover the required PoE load and operating temperature. Does It Power Connected Devices?ExpandCollapse Yes. 8 ports support IEEE 802.3af/at PoE+, up to 30 W per port and 240 W in total when the correct supply provides enough power. The shared budget is not available separately on every port. Can It Be Installed Outdoors?ExpandCollapse Use an appropriate protected enclosure. IP40 is a cabinet protection rating, not a waterproof outdoor rating. The switch operates from −40°C to 75°C with suitable power and installation conditions. Are Optical Modules Included?ExpandCollapse No. Select supported modules for the fibre type, distance, wavelength, connector and temperature range. The module at the other end must match the link. Does Long-Range Mode Keep Gigabit Speed?ExpandCollapse No Gigabit speed is promised over 250 m. Extended PoE mode trades the normal Ethernet operating conditions for longer reach; confirm the required mode, cable and endpoint performance before deployment. 더 보기