D-Link DIS-700G-28XS 28-Port Industrial 10G Fibre Layer 2+ Managed Switch
Industrial Connectivity With Room for the Real Installation The DIS-700G-28XS brings 24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks to demanding industrial networks. Its IP30-rated metal housing, fanless cooling and −40–75°C operating range suit control cabinets, factory networks and infrastructure sites where ordinary office equipment may not be the right fit. Data-only interfaces connect separately powered equipment without a PoE output. Managed VLANs, traffic priority, network redundancy and diagnostic tools help organise the installation and support fault finding. Four 10G optical uplinks connect the fibre aggregation layer without changing the Gigabit access design. The external DC power supply is selected separately for the site, the required temperature range and any connected PoE load. Highlights Connections 24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks. No PoE output; endpoints require their own power. Compatible optical modules are selected separately. Industrial Installation IP30 metal enclosure and fanless cooling. −40–75°C operating temperature. 19-inch rack installation. Power and Operation Dual 20–57 VDC inputs. External DC supply is not included. Managed switching with VLANs and traffic controls. 5-year warranty. Key Features Connect the Equipment at the Edge 24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks. The separate SFP+ uplinks provide a higher-bandwidth path for aggregated traffic from multiple optical access links. Select the cable and endpoint speed as part of the complete connection. Build Around a Clear Power Design The switch carries Ethernet data and does not provide PoE power to connected devices. Dual DC input paths allow an installation to use a suitable redundant power arrangement. Size the external supply for the switch and the cabinet conditions, and provide separate power for endpoints. Keep the Cabinet Installation Practical The IP30 metal enclosure and fanless design suit an appropriately protected industrial cabinet. The specified −40–75°C operating range gives more installation flexibility than a standard office switch. Rack mounting organises the optical aggregation equipment in a 19-inch installation. The enclosure rating is not a weatherproof or waterproof rating; use the site enclosure required for the environment. Keep Traffic Organised VLANs separate services such as production, cameras and management. QoS and multicast controls help manage competing traffic on shared links, while access controls support a more deliberate security policy. These are configured functions, so the commissioning process should match the actual applications and network layout. Support Recovery and Fault Finding Ring protection, spanning tree and link aggregation provide options for a tested redundant topology. Management tools, logs and status indicators help locate an interrupted link or an abnormal power condition. Recovery performance depends on the design and configuration, rather than removing every possible interruption. Extend the Link With the Right Media The SFP interfaces use separately selected supported optical modules. Match fibre type, wavelengths, connector, distance and temperature rating at both ends. The 10G SFP+ ports are also backward compatible with supported 1G SFP modules. Summary The DIS-700G-28XS combines managed industrial networking with data-only connections and a wide operating-temperature range. Select the DC supply, installation enclosure and any optical modules for the complete site design. Frequently Asked Questions How Many Data Ports Does It Have?ExpandCollapse 24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks. The console is a separate management connection and is not counted as a data port. Does It Include a Power Supply?ExpandCollapse No. Select a compatible external DC supply for dual 20–57 vdc inputs. Check the voltage, power capacity and operating temperature for the installation. Does It Power Connected Devices?ExpandCollapse No. This model has no PoE output. Connected cameras, access points or other endpoints need their own suitable power arrangement. Can It Be Installed Outdoors?ExpandCollapse Use an appropriate protected enclosure. IP30 is a cabinet protection rating, not a waterproof outdoor rating. The switch operates from −40°C to 75°C with suitable power and installation conditions. Are Optical Modules Included?ExpandCollapse No. Select supported modules for the fibre type, distance, wavelength, connector and temperature range. The module at the other end must match the link. How Is the Switch Managed?ExpandCollapse Use the supported web interface, CLI or SNMP tools. Restrict management access, save the tested configuration and monitor the power and link status during normal operation.
추가 상품 (1)
3005, Ubi Avenue 3, #01-88에서 픽업 가능
일반적으로 2~4일 후 준비 완료
D-Link DIS-700G-28XS 28-Port Industrial 10G Fibre Layer 2+ Managed Switch
제품 설명
Industrial Connectivity With Room for the Real Installation
The DIS-700G-28XS brings 24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks to demanding industrial networks. Its IP30-rated metal housing, fanless cooling and −40–75°C operating range suit control cabinets, factory networks and infrastructure sites where ordinary office equipment may not be the right fit. Data-only interfaces connect separately powered equipment without a PoE output.
Managed VLANs, traffic priority, network redundancy and diagnostic tools help organise the installation and support fault finding. Four 10G optical uplinks connect the fibre aggregation layer without changing the Gigabit access design. The external DC power supply is selected separately for the site, the required temperature range and any connected PoE load.
Highlights
Connections
- 24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks.
- No PoE output; endpoints require their own power.
- Compatible optical modules are selected separately.
Industrial Installation
- IP30 metal enclosure and fanless cooling.
- −40–75°C operating temperature.
- 19-inch rack installation.
Power and Operation
- Dual 20–57 VDC inputs.
- External DC supply is not included.
- Managed switching with VLANs and traffic controls.
- 5-year warranty.
Key Features
Connect the Equipment at the Edge
24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks. The separate SFP+ uplinks provide a higher-bandwidth path for aggregated traffic from multiple optical access links. Select the cable and endpoint speed as part of the complete connection.
Build Around a Clear Power Design
The switch carries Ethernet data and does not provide PoE power to connected devices. Dual DC input paths allow an installation to use a suitable redundant power arrangement. Size the external supply for the switch and the cabinet conditions, and provide separate power for endpoints.
Keep the Cabinet Installation Practical
The IP30 metal enclosure and fanless design suit an appropriately protected industrial cabinet. The specified −40–75°C operating range gives more installation flexibility than a standard office switch. Rack mounting organises the optical aggregation equipment in a 19-inch installation. The enclosure rating is not a weatherproof or waterproof rating; use the site enclosure required for the environment.
Keep Traffic Organised
VLANs separate services such as production, cameras and management. QoS and multicast controls help manage competing traffic on shared links, while access controls support a more deliberate security policy. These are configured functions, so the commissioning process should match the actual applications and network layout.
Support Recovery and Fault Finding
Ring protection, spanning tree and link aggregation provide options for a tested redundant topology. Management tools, logs and status indicators help locate an interrupted link or an abnormal power condition. Recovery performance depends on the design and configuration, rather than removing every possible interruption.
Extend the Link With the Right Media
The SFP interfaces use separately selected supported optical modules. Match fibre type, wavelengths, connector, distance and temperature rating at both ends. The 10G SFP+ ports are also backward compatible with supported 1G SFP modules.
Summary
The DIS-700G-28XS combines managed industrial networking with data-only connections and a wide operating-temperature range. Select the DC supply, installation enclosure and any optical modules for the complete site design.
Frequently Asked Questions
How Many Data Ports Does It Have?
24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks. The console is a separate management connection and is not counted as a data port.
Does It Include a Power Supply?
No. Select a compatible external DC supply for dual 20–57 vdc inputs. Check the voltage, power capacity and operating temperature for the installation.
Does It Power Connected Devices?
No. This model has no PoE output. Connected cameras, access points or other endpoints need their own suitable power arrangement.
Can It Be Installed Outdoors?
Use an appropriate protected enclosure. IP30 is a cabinet protection rating, not a waterproof outdoor rating. The switch operates from −40°C to 75°C with suitable power and installation conditions.
Are Optical Modules Included?
No. Select supported modules for the fibre type, distance, wavelength, connector and temperature range. The module at the other end must match the link.
How Is the Switch Managed?
Use the supported web interface, CLI or SNMP tools. Restrict management access, save the tested configuration and monitor the power and link status during normal operation.
사양
D-Link DIS-700G-28XS 28-Port Industrial 10G Fibre Layer 2+ Managed Switch
The DIS-700G-28XS is an industrial layer 2+ managed switch with 28 data interfaces and a fanless IP30 metal enclosure. This model provides data connectivity without PoE output. SFP optics and the compatible endpoint define each fibre link. Dual DC input paths support an appropriately designed power installation. The −40–75°C operating range applies to the switch; the selected supply, modules and surrounding enclosure must also suit the site.
| Specification | Details |
|---|---|
| Interfaces | |
| Data Ports | 24 × 100/1000 Mbps SFP slots plus 4 × 10GbE SFP+ uplinks |
| Optical Uplinks | 4 × 10GbE SFP+; supported 1G SFP backward compatibility |
| PoE Output | Not provided |
| Deployment | Data-only network connections |
| Optical Modules | Separate supported SFP modules required |
| Switching and Traffic | |
| Management Class | Layer 2+ Managed |
| MAC Address Table | 8K entries |
| Jumbo Frames | 9 KB |
| Segmentation | IEEE 802.1Q VLANs; port-based VLAN controls |
| Multicast | IGMP snooping and querying |
| Maximum VLANs | 2048 |
| Multicast Groups | Up to 512 |
| QoS Queues | 8; SPQ, WRR and combined scheduling |
| Access Control Scale | 20 profiles with up to 32 rules per profile |
| Management and Resilience | |
| Management | Web interface, CLI and SNMP v1/v2c/v3 |
| Spanning Tree | STP, RSTP and MSTP |
| Link Aggregation | Static or LACP aggregation |
| Ring Recovery | Under 20 ms in the specified configured topology |
| Security | Port access controls, storm control and network access policies |
| Diagnostics | Logs, status monitoring and cable diagnostics |
| Power and Monitoring | |
| DC Input | Dual 20–57 VDC inputs |
| Maximum Consumption | 35 W |
| External Supply | Required separately; size for the total switch and any PoE load |
| Alarm Relay | 2 A at 24 VDC |
| Power Arrangement | Dual inputs support separately designed redundant DC paths |
| Physical and Environmental | |
| Enclosure | IP30-rated metal; fanless |
| Mounting | 19-inch rack |
| Dimensions | 440 × 44 × 318.5 mm |
| Device Weight | 4.5 kg |
| Operating Temperature | −40–75°C |
| Storage Temperature | −40–85°C |
| Humidity | 5–95% RH, non-condensing |
| Warranty | 5 years |
추가 상품
