D-Link DGS-1100-08PV2 8-Port Gigabit PoE+ Smart Managed Switch

Managed Gigabit Power in a Compact Desktop Switch The D-Link DGS-1100-08PV2 brings 8 Gigabit data connections into a manageable business network. Its 8 powered copper ports share a 64W PoE budget for compatible access points, cameras and phones. The web interface gives an administrator direct control over the switch without turning an ordinary access installation into a complex routing project. VLAN, traffic-priority and diagnostic functions help structure the network around its actual users and equipment. A fanless design keeps the switch suitable for quiet indoor workspaces. The per-port limit and total PoE budget must both be respected. A suitable router or firewall remains separate. Highlights Connections Matched to the Installation 8 simultaneous Gigabit data ports Copper Ethernet connections with automatic negotiation 8 powered ports; 64W shared budget Practical Traffic Control Port-based and IEEE 802.1Q VLANs Four traffic queues per port Surveillance and voice VLAN functions Installation and Administration Fanless operation IPv4 web-based management Loopback detection and copper-cable diagnostics Key Features Use the Right Ports for Each Connection 8 × 10/100/1000 Mbps RJ45 ports. There is no optical slot to populate. These are Gigabit interfaces, rather than 2.5GbE or 10GbE access ports. Plan Power Around the Actual Devices The switch provides 64W of shared PoE output. Ports 1–8 support IEEE 802.3af/at, up to 30W per port. Add the connected devices' maximum requirements before installation, including any device that draws more during startup or when heaters, illuminators or motors operate. The shared budget is separate from the switch's AC input consumption; port count multiplied by the per-port maximum is not the available total. Keep Different Traffic Organised Port-based and IEEE 802.1Q VLANs allow the administrator to separate users, devices or services. Voice and surveillance VLAN functions provide useful options for a correctly configured installation. The model supports 32 static VLAN groups. The router, authentication and security design still determine how traffic moves between those segments. Prioritise Traffic Without Promising More Bandwidth Four queues per port, strict-priority or weighted-round-robin scheduling and port-based bandwidth controls let the administrator plan how traffic shares each connection. IGMP snooping helps keep multicast traffic on the links that need it. These controls organise existing link capacity; they do not create a faster internet connection or guarantee an application's response time. Troubleshoot from a Manageable Interface Use the IPv4 web interface for configuration and monitoring. Loopback detection and cable diagnostics help investigate common link faults, with mirroring available for traffic analysis. Two static-trunk groups are supported for an appropriate matched network design. Do not confuse link aggregation with one client's guaranteed single-stream speed. Allow for the Complete Installation The device measures 171 × 97.8 × 28.6 mm and weighs 0.43 kg, excluding shipping packaging. It uses an external AC power adapter and a desktop chassis. When selecting a UPS or circuit, include the switch itself as well as the connected PoE load. Use appropriate Ethernet cabling and keep the installation within the published environmental limits. Summary The DGS-1100-08PV2 combines 8 Gigabit data connections with useful VLAN, traffic-priority and diagnostic controls. Its 64W budget supports a planned collection of compatible powered devices, while per-port limits remain important. Match the switch, gateway and connected equipment to the actual installation. Frequently Asked Questions Can Every Powered Port Supply Its Maximum Together?ExpandCollapse Not necessarily. All powered ports share 64W. Ports 1–8 support IEEE 802.3af/at, up to 30W per port. Whether a set of devices can run together depends on its combined demand and the configured power allocation. Plan the total before installation. Does It Have Fibre Uplinks?ExpandCollapse No. This exact model provides copper Gigabit RJ45 connections. Choose a model with a verified optical interface if fibre is required. Is It Fanless?ExpandCollapse Yes. The manufacturer specifies fanless operation and 0dB(A) acoustic output. Leave the ventilation clear and install it within the published temperature range. Does It Replace a Router or Firewall?ExpandCollapse No. This is a smart managed Ethernet switch for organising local-network connections and traffic. Internet access, routing between networks and the required firewall design remain separate. Do not assume an uplink slot provides those services. Does It Include D-Lite Cloud Management?ExpandCollapse This exact model is documented with local web-based administration. It is not being supplied as a D-Lite Cloud switch. Choose management equipment and software around the exact supported platform and firmware rather than assuming all D-Link products share one controller. What Warranty Is Provided?ExpandCollapse The hardware warranty is 5 years. Installation, internet connectivity, third-party power equipment and separately purchased optical modules have their own scope and terms. 더 보기