D-Link DAP-E3620OU BE3600 Wi-Fi 7 Outdoor Access Point
Business Wi-Fi Beyond the Building Extend a managed wireless network into outdoor business spaces with the DAP-E3620OU. Dual-band Wi-Fi 7 combines 2.4 GHz and 5 GHz radios, while the 2.5GbE PoE+ uplink provides wired connectivity and power through a suitable network cable. The IP67 enclosure and−30–55 °C operating range support exposed installation sites when the supplied cable glands and mounting hardware are fitted correctly. VLAN mapping, guest access and compatible Nuclias management help keep outdoor coverage part of the wider network design. Highlights Wireless and Uplink BE3600 dual-band Wi-Fi 7 with 2 × 2 radios on 2.4 GHz and 5 GHz. Up to 688 Mbps on 2.4 GHz and 2,882 Mbps on 5 GHz. 2.5GbE PoE+ uplink plus an additional Gigabit LAN port. Outdoor Deployment IP67 enclosure; wall or pole mounting. IEEE 802.3at input with maximum consumption below 20 W. Nuclias Unity and compatible hardware/software controller management. Key Features Wi-Fi 7 Where Work Continues Outdoors The dual-band 2 × 2 radio design brings Wi-Fi 7 to suitable outdoor business areas. Multi-Link Operation and 4096-QAM can improve efficiency with compatible clients and configuration. BE3600 is a combined theoretical signal-rate class, not a promised internet speed for every device. A Multigigabit Wired Connection A 2.5GbE PoE LAN port connects the access point to a suitably equipped switch or injector. A separate Gigabit LAN port provides an additional wired interface. The second port is not specified as PoE output, so connected equipment must have an appropriate power source. An Enclosure Designed for Exposure IP67 protection supports outdoor installation against dust and water ingress when the access point is installed correctly. Use the supplied waterproof glands, route cables thoughtfully and follow the manufacturer mounting requirements. Installation quality and the surrounding electrical protection remain important. Power and Mounting Kept Practical IEEE 802.3at power input and below 20 W maximum consumption allow the AP to be installed without a nearby mains outlet. Two pole clamps and two cable glands are included. Select a compatible PoE source and suitable outdoor cabling separately. Separate Users and Services SSID-to-VLAN mapping helps divide guest, staff and operational traffic. WPA3 Personal/Enterprise, 802.1X, MAC/IP access controls and captive-portal functions provide tools for the site’s access policy. Configure the upstream switch and router consistently with those wireless policies. One Managed Wireless Estate Nuclias Unity and compatible Nuclias hardware or software controllers support central configuration and monitoring. Local web administration, SSH and SNMP provide further management options. Match the exact controller platform and firmware before deployment; the Nuclias name alone does not prove compatibility with an older controller. Summary The D-Link DAP-E3620OU combines dual-band Wi-Fi 7, a 2.5GbE PoE+ uplink and an IP67 enclosure for a considered outdoor business wireless installation. Frequently Asked Questions Does This Wi-Fi 7 Access Point Include 6 GHz?ExpandCollapse No. It is a dual-band 2.4 GHz and 5 GHz access point. Wi-Fi 7 features such as MLO and 4096-QAM require compatible clients, configuration and permitted channels. How Is It Powered?ExpandCollapse It uses IEEE 802.3at PoE+ with maximum consumption below 20 W. Choose a compatible switch or injector and cable installation. The additional Gigabit LAN port is not specified as a PoE output. Can It Be Installed Outdoors?ExpandCollapse Yes. The enclosure is rated IP67 and the specified operating temperature is−30–55 °C. Fit the waterproof cable glands correctly and follow the wall/pole mounting and cable-protection requirements. The enclosure rating does not replace safe electrical installation. Which Controllers Can Manage It?ExpandCollapse The current manufacturer lists Nuclias Unity and compatible Nuclias hardware/software controllers. Confirm support for this exact model and firmware before selecting a controller. Local web, SSH and SNMP administration are also listed. Are Mounting and Power Accessories Included?ExpandCollapse The specified package contains the access point, two pole-mounting clamps, two waterproof cable glands and a quick-start guide. A PoE injector or powered switch is not listed in that package and should be selected separately. How Far Will the Wireless Signal Reach?ExpandCollapse Coverage depends on placement, terrain, obstructions, interference, client radios and local power regulations. Use a site survey and capacity plan rather than a guaranteed distance. The published wireless rates are theoretical signal rates, not measured application throughput.
Add-ons (2)
Pickup available at 3005, Ubi Avenue 3, #01-88
일반적으로 2~4일 후 준비 완료
D-Link DAP-E3620OU BE3600 Wi-Fi 7 Outdoor Access Point
제품 설명
Business Wi-Fi Beyond the Building
Extend a managed wireless network into outdoor business spaces with the DAP-E3620OU. Dual-band Wi-Fi 7 combines 2.4 GHz and 5 GHz radios, while the 2.5GbE PoE+ uplink provides wired connectivity and power through a suitable network cable.
The IP67 enclosure and−30–55 °C operating range support exposed installation sites when the supplied cable glands and mounting hardware are fitted correctly. VLAN mapping, guest access and compatible Nuclias management help keep outdoor coverage part of the wider network design.
Highlights
Wireless and Uplink
- BE3600 dual-band Wi-Fi 7 with 2 × 2 radios on 2.4 GHz and 5 GHz.
- Up to 688 Mbps on 2.4 GHz and 2,882 Mbps on 5 GHz.
- 2.5GbE PoE+ uplink plus an additional Gigabit LAN port.
Outdoor Deployment
- IP67 enclosure; wall or pole mounting.
- IEEE 802.3at input with maximum consumption below 20 W.
- Nuclias Unity and compatible hardware/software controller management.
Key Features
Wi-Fi 7 Where Work Continues Outdoors
The dual-band 2 × 2 radio design brings Wi-Fi 7 to suitable outdoor business areas. Multi-Link Operation and 4096-QAM can improve efficiency with compatible clients and configuration. BE3600 is a combined theoretical signal-rate class, not a promised internet speed for every device.
A Multigigabit Wired Connection
A 2.5GbE PoE LAN port connects the access point to a suitably equipped switch or injector. A separate Gigabit LAN port provides an additional wired interface. The second port is not specified as PoE output, so connected equipment must have an appropriate power source.
An Enclosure Designed for Exposure
IP67 protection supports outdoor installation against dust and water ingress when the access point is installed correctly. Use the supplied waterproof glands, route cables thoughtfully and follow the manufacturer mounting requirements. Installation quality and the surrounding electrical protection remain important.
Power and Mounting Kept Practical
IEEE 802.3at power input and below 20 W maximum consumption allow the AP to be installed without a nearby mains outlet. Two pole clamps and two cable glands are included. Select a compatible PoE source and suitable outdoor cabling separately.
Separate Users and Services
SSID-to-VLAN mapping helps divide guest, staff and operational traffic. WPA3 Personal/Enterprise, 802.1X, MAC/IP access controls and captive-portal functions provide tools for the site’s access policy. Configure the upstream switch and router consistently with those wireless policies.
One Managed Wireless Estate
Nuclias Unity and compatible Nuclias hardware or software controllers support central configuration and monitoring. Local web administration, SSH and SNMP provide further management options. Match the exact controller platform and firmware before deployment; the Nuclias name alone does not prove compatibility with an older controller.
Summary
The D-Link DAP-E3620OU combines dual-band Wi-Fi 7, a 2.5GbE PoE+ uplink and an IP67 enclosure for a considered outdoor business wireless installation.
Frequently Asked Questions
Does This Wi-Fi 7 Access Point Include 6 GHz?
No. It is a dual-band 2.4 GHz and 5 GHz access point. Wi-Fi 7 features such as MLO and 4096-QAM require compatible clients, configuration and permitted channels.
How Is It Powered?
It uses IEEE 802.3at PoE+ with maximum consumption below 20 W. Choose a compatible switch or injector and cable installation. The additional Gigabit LAN port is not specified as a PoE output.
Can It Be Installed Outdoors?
Yes. The enclosure is rated IP67 and the specified operating temperature is−30–55 °C. Fit the waterproof cable glands correctly and follow the wall/pole mounting and cable-protection requirements. The enclosure rating does not replace safe electrical installation.
Which Controllers Can Manage It?
The current manufacturer lists Nuclias Unity and compatible Nuclias hardware/software controllers. Confirm support for this exact model and firmware before selecting a controller. Local web, SSH and SNMP administration are also listed.
Are Mounting and Power Accessories Included?
The specified package contains the access point, two pole-mounting clamps, two waterproof cable glands and a quick-start guide. A PoE injector or powered switch is not listed in that package and should be selected separately.
How Far Will the Wireless Signal Reach?
Coverage depends on placement, terrain, obstructions, interference, client radios and local power regulations. Use a site survey and capacity plan rather than a guaranteed distance. The published wireless rates are theoretical signal rates, not measured application throughput.
사양
D-Link DAP-E3620OU BE3600 Wi-Fi 7 Outdoor Access Point
The DAP-E3620OU is a dual-band BE3600 outdoor access point with 2 × 2 Wi-Fi 7 radios, a 2.5GbE PoE+ uplink and an additional Gigabit LAN interface. Its IP67 enclosure supports wall or pole installation when the mounting and waterproofing requirements are followed. Select compatible power and management equipment, and plan coverage around the site conditions and active clients. Wireless features and permitted channels depend on client support, configuration and regional regulations.
| Specification | Details |
|---|---|
| Wireless | |
| Standard and Class | Wi-Fi 7, IEEE 802.11be; BE3600; backward support for 802.11a/b/g/n/ac/ax. |
| Bands and Streams | 2.4 GHz and 5 GHz; 2 × 2 per band; no 6 GHz radio. |
| Maximum Signal Rates | 688 Mbps at 2.4 GHz; 2,882 Mbps at 5 GHz. |
| Wi-Fi Technologies | MLO and 4096-QAM with compatible clients and configuration. |
| Antennas | 2 × 4 dBi at 2.4 GHz; 2 × 4 dBi at 5 GHz. |
| Operating Frequencies | 2.4–2.483 GHz and 5.15–5.85 GHz; permitted channels depend on region. |
| Network and Management | |
| Ethernet | 1 × 2.5GbE PoE LAN; 1 × Gigabit LAN. |
| Modes | Access point, WDS and WDS+AP. |
| Administration | HTTP/HTTPS web, SSH/Telnet, SNMP and supported Nuclias platforms. |
| Central Management | Nuclias Unity and compatible Nuclias hardware/software controllers. |
| Security | WPA/WPA2/WPA3 Personal/Enterprise, 802.1X, MAC/IP ACLs, Enhanced Open and internal RADIUS. |
| Guest Access | Customisable captive portal and SSID-to-VLAN mapping. |
| Power and Installation | |
| Power Input | IEEE 802.3at PoE+. |
| Maximum Consumption | Below 20 W. |
| Enclosure | IP67. |
| Mounting | Wall or pole; install waterproof glands correctly. |
| Package | Access point; 2 pole clamps; 2 waterproof cable glands; quick-start guide. |
| Physical and Environment | |
| Dimensions | 304 × 181 × 88 mm. |
| Net Weight | 1.6 kg. |
| Temperature | Operating −30–55 °C; storage −40–70 °C. |
| Humidity | Operating 10–90%; storage 5–95%; non-condensing. |
| Warranty | 5 years. |
Add-ons
D-Link DMS-1250-18P 18-Port 2.5GbE Smart Managed PoE++ Switch
