Ubiquiti EAV-Bridge Enterprise 4K60 HDMI and XLR Audio AV-over-IP PoE+ Transceiver

Bring HDMI Video and Professional Audio onto Your Network Connect presentation sources, displays and professional audio through a compact AV-over-IP endpoint. The Ubiquiti EAV-Bridge combines HDMI 2.0 video up to 4K at 60 fps with XLR analogue audio and AES67 networked audio support, making it a practical building block for meeting spaces, teaching environments, digital signage and multi-display installations. Configure each bridge as a source or destination and manage the installation through UniFi Network. A single Gigabit Ethernet connection carries network traffic and PoE+ power, helping keep equipment positions tidy. Start with a source-to-display link, then design a one-to-many distribution system or video wall around the same endpoint hardware. Highlights HDMI Video Distribution HDMI 2.0 input and output supporting video up to 4K60. One-to-one and one-to-many streaming, with video wall layouts up to 8 × 8. The same bridge model can be configured for the source or destination role. Professional Audio Connections Two female XLR inputs with 6.35 mm combo connections and two male XLR outputs. Mono or stereo PCM audio, with 48 V phantom power for suitable input devices. HDMI audio and AES67 support for networked AV system design. Compact, Flexible Installation Gigabit Ethernet with PoE+ input and a maximum device power consumption of 14 W. A 1.3-inch touchscreen provides information at the equipment position. Aluminium enclosure with included DIN rail, wall and pole mounting options. Key Features One Endpoint Design for Either End of the Link Use the same hardware model at the source and display positions, selecting the appropriate role in the AV installation. For an HDMI source-to-display network link, plan a bridge at the source and another at the destination. Additional displays require their own receiving endpoints; this listing is for one bridge. Scale from One Display to a Video Wall HDMI 2.0 input and output support up to 4K at 60 fps, alongside 1080p, 720p and 480p formats. One-to-many streaming lets a source serve multiple destinations, while supported video wall layouts extend up to 8 × 8. Plan the display arrangement, cabling and network capacity together before installation. Bring XLR Audio into the AV Workflow Connect professional analogue audio through the paired XLR inputs and outputs, with 6.35 mm combo connections on the input side. Mono or stereo PCM support and a 20 Hz to 20 kHz frequency response provide a clear specification for system planning. Enable 48 V phantom power only where the connected input equipment requires and supports it. Networked AV Managed through UniFi Bring bridge management into the UniFi Network environment alongside the supporting network infrastructure. The Gigabit Ethernet interface connects each endpoint to the AV network. A planned switching design, multicast handling and sufficient capacity across every link are important when distributing streams to multiple destinations. Power and Data through One Network Cable PoE+ supplies the bridge through its Ethernet port, reducing the need for a separate power socket at each endpoint. Allow up to 14 W for the device and provide a suitable PoE+ source with enough total power for all connected equipment. The touchscreen helps identify local device information during installation and servicing. Mount Where the Installation Needs It The compact aluminium enclosure can be fitted to a DIN rail, mounted to a wall or secured to a suitable pole using the included mounting hardware. Supported pole diameters are 38–50 mm. Position the unit within its operating temperature range and leave connections accessible for service. Summary The Ubiquiti EAV-Bridge brings 4K60 HDMI video, professional XLR audio and networked AV management into a compact PoE+ endpoint. Its selectable source or destination role and flexible mounting options suit installations that need a consistent hardware platform for single displays, distributed screens and video walls. Pair it with appropriate endpoints, cabling and a properly configured AV network for the intended layout. Frequently Asked Questions Do I Need More than One EAV-Bridge?ExpandCollapse For an HDMI source-to-display link over the network, use one bridge at the source and another at the display. Each additional receiving display position needs its own endpoint. This product includes one bridge, so choose the quantity for the complete source and destination layout. What Network and Power Connections Does It Need?ExpandCollapse Each bridge has a Gigabit Ethernet port with PoE+ input and consumes up to 14 W. Provide a suitable PoE+ switch or injector and plan the AV network for multicast traffic and the number of streams crossing each link. Confirm the switch configuration and capacity for the complete installation, especially where streams cross multiple switches. Can It Distribute 4K Video to Several Screens or a Video Wall?ExpandCollapse Yes. The HDMI 2.0 input and output support video up to 4K at 60 fps. The bridge supports one-to-one and one-to-many streaming, together with video wall layouts up to 8 × 8. Each display connection, source format and receiving endpoint must suit the intended layout. Can I Connect Microphones and Other Professional Audio Equipment?ExpandCollapse The bridge has two female XLR inputs with 6.35 mm combo connections and two male XLR outputs, with mono or stereo PCM audio. It supports 48 V phantom power for suitable input equipment. Check the connected microphone or audio device requirements before enabling phantom power. Does It Support IR Control and USB Peripherals?ExpandCollapse A 3.5 mm IR input/output connection and a USB-C port are provided. IR functionality is enabled on supported firmware, and compatible IR blaster or receiver accessories are purchased separately. USB-C and control options depend on the installed bridge firmware and UniFi Network version. Confirm the exact USB peripheral or control workflow before purchase if it is essential to your installation. 더 보기