Ubiquiti UA-Retrofit-Reader OSDP NFC Access Reader
Modern Access Through Existing Cabling Bring a slim, considered access point to an existing doorway with the Ubiquiti Retrofit Reader. It carries OSDP communication over RS-485 and combines NFC credentials with compatible Touch Pass and mobile unlocking. Designed for the UniFi Retrofit Hub, its shallow profile suits entrances where reusing suitable cabling matters as much as the finish beside the door. Highlights A Practical Retrofit Route OSDP v2 communication over RS-485. Works with the UniFi Retrofit Hub using suitable existing cabling. A Familiar Arrival Experience NFC card and keyfob access with compatible credentials. Touch Pass, supported mobile wallets and mobile unlock. A Refined Doorway Finish Slim 13.3 mm-deep housing with included mounting options. IP55 protection for appropriate indoor or outdoor installations. Key Features Reuse Suitable Door Wiring The reader connects to the hub through RS-485 rather than an Ethernet PoE port. A retrofit can therefore retain appropriate existing reader cabling after its condition, conductor size and route have been checked. This keeps the wiring plan clear while bringing the doorway into UniFi Access. Keep Credentials Convenient A 13.56 MHz NFC interface supports the specified MIFARE and NFC technologies. Touch Pass and mobile unlocking provide further access methods with compatible phones and configured credentials. Access permissions and supported credential services are managed through the UniFi system; this model does not add a fingerprint sensor or keypad. Choose the Right Hub Compatible Models: UniFi Retrofit Hub 2 UA-Retrofit-Hub-2. The reader requires a compatible hub and a 12 V DC supply path. It is a reader component rather than a standalone door controller, so lock power, exit requests and door-state wiring remain part of the complete installation. Finish the Entrance Cleanly The included wall and gang-box mounting hardware provides a neat starting point for installation. A compatible junction box is optional where the cable route or mounting surface requires additional space. The 117 × 45 mm face keeps the installation visually restrained. Plan for the Environment The IP55 housing and published operating range support suitable indoor and outdoor use. Position the reader and seal the cable entry according to the installation guide. Audible feedback and status lighting help users understand the access interaction without changing the physical security design. Summary The Retrofit Reader is a practical choice for bringing NFC and compatible mobile access to an existing doorway. Pair it with the correct UniFi Retrofit Hub, suitable wiring and a properly planned lock circuit for a clear, consistent access experience. Frequently Asked Questions Does This Reader Have Fingerprint or PIN Entry?ExpandCollapse No. This standard Retrofit Reader provides NFC and compatible Touch Pass/mobile access. The Retrofit Fingerprint Reader is a separate model. Which Hub Does It Need?ExpandCollapse Use the UniFi Retrofit Hub 2 UA-Retrofit-Hub-2. The reader is not a standalone controller and does not directly replace the hub or lock power supply. Can It Use My Existing Reader Cable?ExpandCollapse It uses RS-485 with a 12 V DC supply. Existing wiring must be checked for condition, conductor size, distance and the required connections before reuse. Does It Connect Through PoE?ExpandCollapse No. This model uses a 12 V DC supply and RS-485/OSDP communication. Its connector should not be treated as an Ethernet PoE input. Are Mobile Credentials Included Without Limits?ExpandCollapse Mobile access depends on supported devices, configured credentials and the applicable service terms. Check the required Touch Pass entitlement for the installation.
Mga Dagdag na Produkto (3)
Maaaring kunin sa 3005, Ubi Avenue 3, #01-88
Karaniwang handa sa loob ng 2-4 na araw ng negosyo (hindi kasama ang mga pampublikong pista opisyal)
Ubiquiti UA-Retrofit-Reader OSDP NFC Access Reader
Umorder ng maraming opsyon
Itakda ang dami para sa bawat opsyon. Awtomatikong maa-update ang iyong cart.
Variant
Dami
Presyo
Variant total
Variants
Total items
Total items
Product subtotal
Paglalarawan
Modern Access Through Existing Cabling
Bring a slim, considered access point to an existing doorway with the Ubiquiti Retrofit Reader. It carries OSDP communication over RS-485 and combines NFC credentials with compatible Touch Pass and mobile unlocking. Designed for the UniFi Retrofit Hub, its shallow profile suits entrances where reusing suitable cabling matters as much as the finish beside the door.
Highlights
A Practical Retrofit Route
- OSDP v2 communication over RS-485.
- Works with the UniFi Retrofit Hub using suitable existing cabling.
A Familiar Arrival Experience
- NFC card and keyfob access with compatible credentials.
- Touch Pass, supported mobile wallets and mobile unlock.
A Refined Doorway Finish
- Slim 13.3 mm-deep housing with included mounting options.
- IP55 protection for appropriate indoor or outdoor installations.
Key Features
Reuse Suitable Door Wiring
The reader connects to the hub through RS-485 rather than an Ethernet PoE port. A retrofit can therefore retain appropriate existing reader cabling after its condition, conductor size and route have been checked. This keeps the wiring plan clear while bringing the doorway into UniFi Access.
Keep Credentials Convenient
A 13.56 MHz NFC interface supports the specified MIFARE and NFC technologies. Touch Pass and mobile unlocking provide further access methods with compatible phones and configured credentials. Access permissions and supported credential services are managed through the UniFi system; this model does not add a fingerprint sensor or keypad.
Choose the Right Hub
Compatible Models: UniFi Retrofit Hub 2 UA-Retrofit-Hub-2. The reader requires a compatible hub and a 12 V DC supply path. It is a reader component rather than a standalone door controller, so lock power, exit requests and door-state wiring remain part of the complete installation.
Finish the Entrance Cleanly
The included wall and gang-box mounting hardware provides a neat starting point for installation. A compatible junction box is optional where the cable route or mounting surface requires additional space. The 117 × 45 mm face keeps the installation visually restrained.
Plan for the Environment
The IP55 housing and published operating range support suitable indoor and outdoor use. Position the reader and seal the cable entry according to the installation guide. Audible feedback and status lighting help users understand the access interaction without changing the physical security design.
Summary
The Retrofit Reader is a practical choice for bringing NFC and compatible mobile access to an existing doorway. Pair it with the correct UniFi Retrofit Hub, suitable wiring and a properly planned lock circuit for a clear, consistent access experience.
Frequently Asked Questions
Does This Reader Have Fingerprint or PIN Entry?
No. This standard Retrofit Reader provides NFC and compatible Touch Pass/mobile access. The Retrofit Fingerprint Reader is a separate model.
Which Hub Does It Need?
Use the UniFi Retrofit Hub 2 UA-Retrofit-Hub-2. The reader is not a standalone controller and does not directly replace the hub or lock power supply.
Can It Use My Existing Reader Cable?
It uses RS-485 with a 12 V DC supply. Existing wiring must be checked for condition, conductor size, distance and the required connections before reuse.
Does It Connect Through PoE?
No. This model uses a 12 V DC supply and RS-485/OSDP communication. Its connector should not be treated as an Ethernet PoE input.
Are Mobile Credentials Included Without Limits?
Mobile access depends on supported devices, configured credentials and the applicable service terms. Check the required Touch Pass entitlement for the installation.
Mga detalye
Ubiquiti UA-Retrofit-Reader OSDP NFC Access Reader
The Ubiquiti Retrofit Reader is an RS-485 OSDP access reader for use with the UniFi Retrofit Hub. It supports NFC credentials and compatible mobile access within a slim IP55 housing. Unlike a PoE reader, it requires a 12 V DC supply and a suitable reader-cable connection. The following specifications cover the standard NFC model, its installation requirements and its operating conditions; fingerprint and keypad functions belong to a different reader.
| Specification | Details |
|---|---|
| Access and Integration | |
| Compatible Controller | UniFi Retrofit Hub 2 UA-Retrofit-Hub-2 |
| Management | UniFi Access |
| Communication | RS-485 with OSDP v2; BLE 4.1 and NFC |
| Access Methods | NFC card/keyfob; compatible Touch Pass, mobile wallets and mobile unlock |
| NFC Interface | 13.56 MHz; read range under 30 mm |
| Credential Technologies | ISO 14443 A/B and 15693; NFC tags 1–5; MIFARE Classic, Plus, Ultralight and DESFire |
| Power and Feedback | |
| Supply | 12 V DC |
| Maximum Consumption | 2.5 W |
| Feedback and Controls | Speaker, RGBW status indicator and factory-reset button |
| Installation and Environment | |
| Dimensions | 117 × 45 × 13.3 mm |
| Device Weight | 82 g |
| Construction | Polycarbonate and aluminium alloy; stainless-steel mounting parts |
| Mounting | Wall/gang-box hardware included; compatible junction box optional |
| Protection | IP55 |
| Operating Temperature | −30 to 50 °C |
| Operating Humidity | 5–90% non-condensing |








































