Insta360 Hard Hat Camera Mount and Base with Magnetic Quick Release

A Clearer Record of Every Site Walk Keep your hands free while a compatible Insta360 360° camera records the surroundings of your inspection. The Hard Hat Camera Mount combines a curved adhesive base, a low-profile aluminium mount and a magnetic connection for practical helmet-mounted capture. Choose the complete mount to build your setup, or the separate base to use with a mount you already own. Highlights Purposeful Site Capture Hands-free recording for site inspections and progress documentation. Horizontal camera positioning with a low-profile mount. A Considered Mounting System Curved adhesive base with a magnetic mount connection. Adjustable standard 1/4-inch camera screw and silicone contact pads. Choose the Right Package Complete mount includes a sticky base, safety tether and hex wrench. Separate base is for use with an existing Hard Hat Camera Mount. Key Features Document the Walk as You Work A camera on your hard hat can capture the surrounding scene as you follow an inspection route, leaving your hands available for a tablet or notes when it is safe to use them. The footage can support progress reviews and visual records. Recording, processing and any site-documentation software depend on the camera and workflow you choose. Keep the Camera Close to the Helmet The horizontal mounting arrangement places the camera in a lower profile than an upright extension. The curved sticky base is designed to follow suitable hard-hat contours. Check the fit on the particular helmet before installation and leave the lenses unobstructed. Connect Magnetically and Adjust the Camera The mount uses a magnetic connection to the base for convenient attachment and removal. Adjustable screw positions and a standard 1/4-inch screw secure a supported camera to the upper mount. Silicone pads help reduce vibration at the contact points. They do not eliminate movement or replace the camera’s own stabilisation. Start with the Mount or Add a Spare Base Select Hard Hat Camera Mount for the complete mounting package: mount, sticky base, safety tether and hex wrench. Select Hard Hat Camera Mount Base when you already have the matching upper mount and need an additional base. The base alone does not attach a camera directly, and the two options are not complete kits with identical contents. Give the Adhesive Time to Bond Prepare a dry surface free of dust and grease, check the base orientation and remove the adhesive liner. Press the base firmly in place for 30 seconds, then allow 24 hours before attaching the camera. Complete this preparation ahead of the inspection rather than fitting a new adhesive base immediately before a walk. Check the Whole Setup Before Recording Confirm the camera screw, magnetic seating and adhesive attachment before use. The included tether can connect the base and upper mount for additional retention; check the camera position and shooting angle as well. Use the accessory in line with your helmet manufacturer’s requirements and site rules. Camera mounting does not replace the hard hat’s protective function. Summary The Insta360 Hard Hat Camera Mount provides a practical way to add hands-free 360° capture to site walkthroughs. Its curved base, magnetic attachment and adjustable camera connection work together as one mounting system. Choose the complete mount or the separate base to suit your existing equipment, then prepare the adhesive and check the fit before recording. Frequently Asked Questions Which Option Should I Choose?ExpandCollapse Choose Hard Hat Camera Mount if you need the complete mounting package. It includes the upper mount, sticky base, safety tether and hex wrench. Choose Hard Hat Camera Mount Base only when you already have the matching upper mount and want an additional base. Which Insta360 Cameras Are Compatible?ExpandCollapse The complete Hard Hat Camera Mount is listed for X6, X4 Air, X5, X4, X3, ONE X2 and ONE RS 1-Inch 360 Edition. The separate base works with the matching Hard Hat Camera Mount, not directly with a camera. Check the fit with any camera case or other accessories before use. How Long Should the Adhesive Set?ExpandCollapse Press the base onto a clean, dry and grease-free surface for 30 seconds. Allow 24 hours before attaching the camera so the adhesive can develop its bond. Check the base orientation before pressing it in place. Are the Camera and Hard Hat Included?ExpandCollapse No. Cameras and hard hats shown in the photographs illustrate the installed setup. The complete mount package contains the mount, sticky base, safety tether and hex wrench. The separate base option does not include the complete mounting kit. Will It Fit Every Hard Hat and Prevent Camera Movement?ExpandCollapse The curved base is designed for suitable hard-hat shapes, but the fit needs to be checked on your particular helmet. Silicone pads help reduce vibration; they do not guarantee motion-free footage. Check the adhesive, screw and magnetic attachment, and follow the helmet manufacturer’s requirements and your site rules. Magbasa pa