Edifier P230 USB-C Wired Earbuds with Remote and Mic

A Direct Digital Connection For Everyday Listening The Edifier P230 USB-C pairs wired convenience with an integrated digital-to-analogue converter in the USB-C plug. Its 12.4mm dynamic drivers, microphone and in-line controls make it a practical listening companion for a compatible phone, tablet or computer. A choice of ear-tip sizes helps establish a comfortable seal, while supported Android app settings provide an additional way to tailor the sound. Highlights Digital Audio Without Pairing USB-C connection with an integrated DAC. Hi-Res Audio certification with support up to 24-bit/96kHz. Useful Everyday Controls Omnidirectional microphone for compatible calls. Three-button in-line music, call and volume control. A Secure Personal Fit Three ear-tip sizes and a reinforced1.2m cable. IP54 dust and splash resistance. Key Features An Integrated USB Audio Path The DAC is built into the USB-C plug, providing a direct digital audio connection from a compatible host. The earphones take power from the connected device rather than a separate rechargeable headset battery. Confirm that your device supports USB digital audio; the presence of a USB-C socket alone does not verify every audio or control function. Sound With A Suitable Recording And Source The 12.4mm dynamic drivers work with the integrated DAC for playback supporting up to 24-bit/96kHz. The published acoustic response is 20Hz–40kHz. The recording, host configuration and app determine the audio supplied to the earphones, so higher-resolution source material and compatible settings are needed to use the supported digital format. Calls And Playback Close At Hand The in-line remote includes a multifunction button and dedicated volume buttons. Use it for supported music and call actions without repeatedly handling the source device. The manufacturer notes that functions can vary by device, operating system and application; check microphone and remote operation on the combination you intend to use. Personal Equalisation On Android EDIFIER ConneX provides preset and customised EQ settings for supported Android devices. This app feature is Android-only according to the manufacturer’s manual. The app limitation is separate from basic USB audio compatibility, so it does not by itself establish that another host can or cannot play audio. Fit And Cable Practicality The supplied small, medium and large ear tips help you find a secure fit and consistent seal. The cable uses oxygen-free copper wiring reinforced with internal nylon fibres. IP54 protection adds resistance to dust and splashes for everyday use, while connectors should remain clean and dry and the earphones should not be treated as waterproof. Summary Choose the P230 USB-C when a straightforward cable connection needs to include digital audio, a microphone and convenient controls. It is a useful alternative to a wireless pair for compatible USB audio hosts, with Android EQ settings available where supported and no separate headset battery to maintain. Frequently Asked Questions Does P230 USB-C need charging?ExpandCollapse No. It is powered through the connected USB-C source rather than a separate headset battery. Will it work with any USB-C socket?ExpandCollapse The host must support USB digital audio. Call controls and microphone functions also depend on the connected device and software. Does the plug contain a DAC?ExpandCollapse Yes. The manufacturer specifies an integrated DAC in the USB-C plug, with support up to 24-bit/96kHz. Can I adjust EQ on an iPhone?ExpandCollapse The documented EDIFIER ConneX EQ feature for this model is supported on Android only. That is separate from basic USB audio compatibility. Can the earphones be immersed in water?ExpandCollapse No. IP54 describes dust and splash resistance, not suitability for swimming or immersion. Keep the connector dry. Magbasa pa