D-Link Cat6 UTP Flat Ethernet Patch Cable

A Neater Wired Connection for Everyday Devices The D-Link Cat6 patch cable provides a ready-terminated wired connection for compatible computers, switches, routers, printers and other Ethernet devices. Its flat blue profile helps keep a desk, equipment shelf or patching area organised without adding a bulky round lead. RJ45 plugs at both ends make everyday connections straightforward, while reinforced connector boots help support the cable where it meets each plug. Choose the length that reaches comfortably, allow gentle bends and remember that the complete network determines the connection speed. Highlights Practical Wired Connectivity Cat6 unshielded twisted-pair patch cable RJ45 male connectors at both ends Gigabit Ethernet connectivity up to 1000Mbps Slim Cable Management Flat blue cable Slim 1.4mm cable profile Reinforced connector construction Straightforward Selection Choose the required length in the selector Ready-terminated cable for compatible Ethernet ports 1-year cable warranty Key Features Make a Direct Ethernet Connection Use the ready-terminated cable to connect compatible Ethernet equipment without fitting connectors or cutting bulk installation cable. It suits a computer at a desk, a printer beside a router or a short patch connection around a switch. The network ports at both ends must support the intended connection. Keep Everyday Cable Routes Tidy The flat profile is useful where a conventional round patch lead would feel bulky behind equipment or alongside a desk. Choose a route that avoids sharp folds, crushing and repeated pulling. A slim cable should still be treated as a network component rather than forced through an unsuitable gap. Support the Plug and Cable Junction The reinforced connector construction and protective boots help support the transition between cable and plug. Release the latch before disconnecting and pull the plug body rather than the cable. Keep sufficient slack so moving a laptop or another device does not place continuous strain on the network socket. Match Expectations to the Complete Link The Cat6 patch cable supports Gigabit Ethernet connectivity up to 1000Mbps, with a 250MHz category bandwidth. A patch cable does not set the Internet-service speed or upgrade a slower port. Both connected devices, the installed cabling channel and network configuration determine the link that can be negotiated. Choose the Length That Fits the Installation Use the length selector to match the route between the equipment, leaving enough slack for a gentle bend and access to the connector latch. Avoid pulling a shorter cable taut or leaving unnecessary coils under other equipment. Check the complete route before choosing a lead for a fixed layout. Plan Higher-Speed Channels Deliberately Cat6 and Cat6A are different cabling categories. A higher-speed link needs compatible ports and a suitable, verified complete channel; a short patch lead alone does not prove the performance of the whole installation. Where 10Gbps over a full 100 m channel is required, plan an appropriate Cat6A system rather than assuming any Cat6 lead guarantees it. Summary The D-Link Cat6 UTP flat patch cable is a practical choice for a tidy wired connection between compatible Ethernet devices. Its slim profile and reinforced plugs suit everyday patching, with length selected to fit the actual route. Match the cable, network ports and complete installation to the intended link speed. Frequently Asked Questions Which Devices Can I Connect?ExpandCollapse Use it between compatible RJ45 Ethernet ports on equipment such as computers, routers, switches, printers and other network devices. It is an Ethernet cable, not a USB, telephone or optical-fibre lead. What Speed Is It Designed For?ExpandCollapse It supports Gigabit Ethernet connectivity up to 1000Mbps. Actual link speed depends on the ports at both ends and the complete installed cable channel. A cable does not increase an Internet subscription or make a slower Ethernet port faster. Is 250MHz the Same as 250Mbps?ExpandCollapse No. MHz describes the cabling category’s frequency bandwidth, while Mbps describes a data rate. The 250MHz category bandwidth and 1000Mbps Ethernet rate describe different properties. Neither value guarantees the speed of an Internet connection. Does Cat6 Guarantee a Full 100 m 10Gbps Link?ExpandCollapse No. 10Gbps performance on Cat6 depends on channel length, interference, connectors and installation quality. For a full 100 m 10Gbps channel, choose an appropriately designed and verified Cat6A cabling system with compatible equipment. Can the Flat Cable Be Folded or Crushed?ExpandCollapse Avoid sharp folds, trapping the cable beneath heavy equipment or forcing it through a tight gap. Route it with gentle bends, leave appropriate slack and release the connector latch before unplugging. The slim shape does not make it immune to damage. What Warranty Is Included?ExpandCollapse A 1-year cable warranty applies under the manufacturer’s applicable cable terms. Keep the cable within its intended use and handling conditions. Magbasa pa