D-Link DXS-3600-EM-8T 8-Port Gigabit Ethernet Expansion Module

Connect More Gigabit Equipment Through Your DXS-3600 The DXS-3600-EM-8T adds eight copper Ethernet ports with 10/100/1000 Mbps operation. It provides a practical way to connect additional Gigabit equipment through a compatible DXS-3600 host while keeping the existing switch installation. Designed for DXS-3600-16S and DXS-3600-32S, this is a host-specific expansion module. It is installed in the supported expansion slot and works through the switch's hardware and software; it is not a standalone switch or a universal expansion card. Highlights Purpose-Built Connectivity 8 × 10/100/1000BASE-T RJ45 ports Designed for DXS-3600-16S and DXS-3600-32S. A Planned Installation Uses the supported DXS-3600 expansion slot. Confirm the host hardware revision and firmware before installation. Complete the Connection Requires suitable twisted-pair copper Ethernet cabling and compatible RJ45 Ethernet endpoints. Host switch and connection media are separate. Key Features Expand the Existing Chassis Use the available module slot to add the required connection type while retaining the compatible host switch. The module draws power and management from the host, keeping the added ports within the same installation rather than introducing a separate standalone device. Choose the Right Connection Each added port supports up to 1 Gbps. These are Gigabit RJ45 connections, so they should be chosen for Gigabit equipment rather than applications that require 10G access ports. Match the Host Before Installation Supported hosts are DXS-3600-16S and DXS-3600-32S. Check the exact chassis, available expansion slot, hardware revision and firmware before ordering. Follow the host installation procedure and plan any required maintenance window; do not assume that a module can be installed during normal operation. Plan the Complete Link The connection also needs suitable twisted-pair copper Ethernet cabling and compatible RJ45 Ethernet endpoints. Check the equipment at both ends and the cable route, including available rack space and cable handling, so the selected module serves a complete compatible link. Summary The DXS-3600-EM-8T is a focused upgrade for DXS-3600-16S and DXS-3600-32S. Its 8 × 10/100/1000base-t rj45 ports suit the stated connection task while retaining the existing compatible chassis. Confirm the host and required connection media before selecting it for a new link or an expansion project. Frequently Asked Questions Which Switches Can Use This Module?ExpandCollapse It is designed for DXS-3600-16S and DXS-3600-32S. Confirm the exact host hardware revision, firmware and available expansion slot before ordering. Is This a Complete Standalone Switch?ExpandCollapse No. It is an expansion module that requires a compatible DXS-3600 host switch. It cannot operate on its own or be fitted to an unrelated switch family. What Else Is Required?ExpandCollapse You need a compatible host and suitable twisted-pair copper Ethernet cabling and compatible RJ45 Ethernet endpoints. The host switch and connection media are separate items. Can I Install It Without Interrupting the Network?ExpandCollapse Follow the installation instructions for the exact host and module. Plan the maintenance procedure with the person responsible for the network rather than assuming live installation is supported. Will Every Connected Device Run at the Maximum Port Speed?ExpandCollapse Each added port supports up to 1 Gbps. These are Gigabit RJ45 connections, so they should be chosen for Gigabit equipment rather than applications that require 10G access ports. What Warranty Is Included?ExpandCollapse The warranty is 1 year. Magbasa pa