Ubiquiti UPS-2U UniFi Managed 2U Rackmount UPS
Intelligent Rackmount UPS for UniFi Power Management EU 230 V Version: IEC C14 input and C13 outlets. The manufacturer supplies this version with an EU mains plug; check the required site power connection before ordering. Prepare backup power for your network with the Ubiquiti UPS-2U, a UniFi-managed 1.5kVA rackmount uninterruptible power supply. Designed for enterprise and data centre environments, this managed UPS provides 1,000W of power output, 8 total outlets, and UniFi UPS monitoring and supported shutdown integration. With surge protection, field-replaceable batteries, and NUT compatibility, it delivers managed backup power for mission-critical UniFi systems and third-party devices. Highlights 1.5kVA / 1,000W Capacity: Reliable power backup for essential UniFi devices. 8 Outlets: 4 battery backup with surge protection, 4 surge-only outputs. Managed via UniFi: Supports centralised UPS monitoring and graceful shutdown for compatible UNVR and UNAS systems with UniFi OS 4.4.3 or later. Field-Replaceable Battery: 216Wh total capacity for service replacement following the manufacturer’s instructions. NUT Protocol Support: Supports NUT integration with compatible third-party systems; configuration is required. Rugged 2U Rackmount Design: Compact and durable build for enterprise installations. EU 230 V Version: IEC C14 input and C13 outlets; supplied EU mains plug. Key Features Reliable Power Protection Line-Interactive Topology: Rated 230 V nominal output, with ±10% voltage regulation in battery mode. Fast Response Time: Battery transfer is rated at 6 ms typical and 10 ms maximum. Surge and Short-Circuit Protection: Built-in circuit breakers and protection circuits provide protection subject to the device ratings and installation requirements. Simulated Sine Wave Output: Efficient and stable backup power for networking devices. Battery and Runtime Performance 216Wh Dual Lead-Acid Batteries (12V, 9Ah): Provides 216Wh of rated battery energy; approximately 6–8 hours to recover to 90% capacity. Runtime Efficiency: Manufacturer-rated runtime is 8 minutes at 500W and 2.3 minutes at full load; actual runtime varies with load, battery condition and environment. Recharge Planning: Allow the specified 6–8 hours to recover to 90% capacity; conditions affect actual performance. Field-Replaceable Battery: Follow the manufacturer’s replacement procedure during planned battery maintenance. Smart Management and Monitoring Ethernet Connectivity: Integrated 100/10 MbE port for network management. UniFi OS Integration: Monitor supported UPS status and runtime information through the UniFi interface. Graceful Shutdown Support: Supports graceful shutdown for compatible UNVR and UNAS systems with UniFi OS 4.4.3 or later; configure and test the intended setup. NUT Compatibility: Supports integration with compatible third-party NUT software; available monitoring and shutdown functions depend on the system and configuration. Durable Rackmount Construction 2U Form Factor: Fits standard server racks with compact 87.4 mm height. Heavy-Duty Steel Build: Galvanised steel chassis for rack installations. Visual Indicators: Multi-colour LED system displays operating, battery, and fault status. Wide Environmental Range: Operates reliably between 0°C and 40°C, up to 3,000 m altitude. Summary The Ubiquiti UPS-2U is a robust UniFi-managed UPS solution built for enterprise environments requiring consistent uptime and intelligent power control. With 1.5kVA capacity, advanced surge protection, and supported UniFi UPS management, it supports planned backup power for routers, switches, and storage devices. For network racks and compatible connected systems, it combines rated battery backup with centralised UPS monitoring and a planned shutdown workflow.
Maaaring kunin sa 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
Ubiquiti UPS-2U UniFi Managed 2U Rackmount UPS
Paglalarawan
Intelligent Rackmount UPS for UniFi Power Management
EU 230 V Version: IEC C14 input and C13 outlets. The manufacturer supplies this version with an EU mains plug; check the required site power connection before ordering.
Prepare backup power for your network with the Ubiquiti UPS-2U, a UniFi-managed 1.5kVA rackmount uninterruptible power supply. Designed for enterprise and data centre environments, this managed UPS provides 1,000W of power output, 8 total outlets, and UniFi UPS monitoring and supported shutdown integration. With surge protection, field-replaceable batteries, and NUT compatibility, it delivers managed backup power for mission-critical UniFi systems and third-party devices.
Highlights
-
1.5kVA / 1,000W Capacity: Reliable power backup for essential UniFi devices.
-
8 Outlets: 4 battery backup with surge protection, 4 surge-only outputs.
-
Managed via UniFi: Supports centralised UPS monitoring and graceful shutdown for compatible UNVR and UNAS systems with UniFi OS 4.4.3 or later.
-
Field-Replaceable Battery: 216Wh total capacity for service replacement following the manufacturer’s instructions.
-
NUT Protocol Support: Supports NUT integration with compatible third-party systems; configuration is required.
-
Rugged 2U Rackmount Design: Compact and durable build for enterprise installations.
-
EU 230 V Version: IEC C14 input and C13 outlets; supplied EU mains plug.
Key Features
Reliable Power Protection
-
Line-Interactive Topology: Rated 230 V nominal output, with ±10% voltage regulation in battery mode.
-
Fast Response Time: Battery transfer is rated at 6 ms typical and 10 ms maximum.
-
Surge and Short-Circuit Protection: Built-in circuit breakers and protection circuits provide protection subject to the device ratings and installation requirements.
-
Simulated Sine Wave Output: Efficient and stable backup power for networking devices.
Battery and Runtime Performance
-
216Wh Dual Lead-Acid Batteries (12V, 9Ah): Provides 216Wh of rated battery energy; approximately 6–8 hours to recover to 90% capacity.
-
Runtime Efficiency: Manufacturer-rated runtime is 8 minutes at 500W and 2.3 minutes at full load; actual runtime varies with load, battery condition and environment.
-
Recharge Planning: Allow the specified 6–8 hours to recover to 90% capacity; conditions affect actual performance.
-
Field-Replaceable Battery: Follow the manufacturer’s replacement procedure during planned battery maintenance.
Smart Management and Monitoring
-
Ethernet Connectivity: Integrated 100/10 MbE port for network management.
-
UniFi OS Integration: Monitor supported UPS status and runtime information through the UniFi interface.
-
Graceful Shutdown Support: Supports graceful shutdown for compatible UNVR and UNAS systems with UniFi OS 4.4.3 or later; configure and test the intended setup.
-
NUT Compatibility: Supports integration with compatible third-party NUT software; available monitoring and shutdown functions depend on the system and configuration.
Durable Rackmount Construction
-
2U Form Factor: Fits standard server racks with compact 87.4 mm height.
-
Heavy-Duty Steel Build: Galvanised steel chassis for rack installations.
-
Visual Indicators: Multi-colour LED system displays operating, battery, and fault status.
-
Wide Environmental Range: Operates reliably between 0°C and 40°C, up to 3,000 m altitude.
Summary
The Ubiquiti UPS-2U is a robust UniFi-managed UPS solution built for enterprise environments requiring consistent uptime and intelligent power control. With 1.5kVA capacity, advanced surge protection, and supported UniFi UPS management, it supports planned backup power for routers, switches, and storage devices. For network racks and compatible connected systems, it combines rated battery backup with centralised UPS monitoring and a planned shutdown workflow.
Mga detalye
Ubiquiti UPS-2U UniFi Managed 2U Rackmount UPS
EU 230 V Version: IEC C14 input and C13 outlets. The manufacturer supplies this version with an EU mains plug; check the required site power connection before ordering.
The Ubiquiti UniFi UPS 2U is a managed rackmount uninterruptible power supply (UPS) designed to deliver reliable backup power and surge protection to UniFi systems and third-party devices. Featuring a 1.5kVA/1,000W capacity, eight total outlets (four battery backup and four surge-only), and supported UniFi management, it supports planned backup power and graceful shutdown for critical network and storage systems such as UNVR and UNAS.
| Specification | Details |
|---|---|
| System and Compatibility | |
| Description | Managed 1.5kVA rackmount UPS with 4 battery backup outlets, 4 surge outlets, and field-replaceable 216Wh battery supporting 8-minute runtime at half load (500W) |
| Form Factor | 2U rack-mount |
| Electrical Version | EU version; C14 input and C13 outputs; supplied EU mains plug |
| Backup Power Compatibility | Appropriately rated connected equipment; graceful shutdown for compatible UNVR/UNAS requires UniFi OS 4.4.3 or later; verify NUT configuration for third-party systems |
| Physical Design | |
| Dimensions (W×D×H) | 442.4 × 300 × 87.4 mm (17.4 × 11.8 × 3.4 in) |
| Weight | 13.7 kg (30.2 lb) |
| Enclosure Material | Galvanised steel |
| Ingress Protection | IP20 |
| Management and Connectivity | |
| Management | Ethernet |
| Networking Interface | (1) 100/10 MbE port for network connection, (2) GbE ports for surge in/out |
| Power and Output | |
| Power Input | (1) OVC II AC in: IEC C14 socket; 1.8 m removable power cord |
| Power Output | (4) battery backup/surge C13 outlets and (4) surge-only C13 outlets; outlets are not individually resettable |
| Capacity | 1,500VA / 1,000W |
| UPS Type | Line interactive |
| Input Voltage Range | 170–280V AC |
| Power Method | TN system, 220–240V AC, 10A max., 50/60 Hz |
| Nominal Input Voltage | 230V AC |
| Output Voltage | 220–240 V AC; 230 V nominal |
| Frequency Range | AC mode: 50/60 Hz ±5 Hz (Auto sensing), Battery mode: 50 Hz ±1 Hz |
| AC Voltage Regulation | ±10% (Battery mode) |
| Transfer Time | 6 ms typical, 10 ms max |
| Waveform | Simulated sine wave (Battery mode) |
| Battery and Protection | |
| Battery Type | (2) Lead Acid 12V, 9Ah |
| Runtime | Full load: 2.3 min; half load (500W): 8 min; actual runtime varies |
| Battery Charging Time | 6–8 hours to 90% capacity |
| Overload Protection (On-line) | 110%: 5 min to fault, 120%: immediate fault |
| Overload Protection (Battery) | 110%: shutdown in 5 sec, 120%: immediate shutdown |
| Short Circuit Protection | Breaker 250V AC, 10A |
| Output Short Circuit Current | Ipeak 444.0A, Irms 223.1A |
| Controls and Environment | |
| Buttons | Power, Factory Reset |
| LED Indicators | Status and operation indicators: initializing, adoption, firmware update, battery mode, locate, warning, low battery |
| Operating Altitude | Up to 3,000 m (1.9 mi) |
| Operating Environment | Pollution Degree 2 |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Storage Temperature | -20 to 50° C (-4 to 122° F) |
| Operating Humidity | 0 to 95% noncondensing |
| Compliance | |
| Certifications | CE, IEC 62040-1 |