QNAP TS-1232PXU-RP 12-Bay 10GbE Rackmount NAS
A practical rack platform for shared data and recovery QNAP TS-1232PXU-RP brings built-in 10GbE networking, flexible SATA storage and redundant power into a business rack platform. Its ARM processor suits managed file sharing, backup and supported surveillance or container applications when the workload is sized appropriately. Plan the network path, drive arrangement and recovery copies together, then use a verified expansion route when more external capacity is needed. The right design makes its connectivity useful without assuming every workload can run at line speed. Highlights Storage for shared business data Hot-swappable SATA HDD or SSD storage in a rack chassis. Snapshot and backup tools for supported storage configurations. Connected to the workload Dual 10GbE SFP+ and dual 2.5GbE networking built in. ARM-compatible applications and containers. A considered installation Redundant power supplies and optional RAIL-B02 mounting. Verified enclosure expansion with the required host connection. Key Features Choose drives for the complete workload The hot-swappable SATA bays accept compatible hard drives or SATA SSDs, allowing storage to be matched to shared files, backups or active application data. Select the exact drive model, firmware, sector format and endurance against the proposed RAID design. Internal bays are not SAS or U.2 NVMe bays. M.2 storage requires a compatible optional PCIe adapter rather than being included as a built-in slot. Build the network path around real access Dual SFP+ 10GbE connections are built in alongside two 2.5GbE ports. Suitable optics or direct-attach cables, switches and client adapters remain separate requirements. The ARM processor, drives and workload determine achieved throughput. Link aggregation can serve multiple flows, but does not automatically combine ports for one ordinary file transfer. Match memory and applications with care The platform runs supported ARM applications and compatible container images. It is not a substitute for an x86 virtualisation host, and x86-only software should not be assumed to run. Upgrading memory means replacing the module in its single slot with a supported larger module. Reserve resources for file services and backup before adding applications or recording cameras. Choose the storage operating system deliberately QTS supplies the storage and application environment for this ARM appliance. Its EXT4 storage, supported volume and LUN snapshots, access controls and backup applications can form part of a practical managed-data design. Check current application support before choosing a container image or surveillance deployment. No QuTS hero or x86 virtual-machine entitlement is implied. Keep recovery copies outside the appliance Snapshots can preserve earlier states of supported volumes or LUNs, while Hybrid Backup Sync coordinates copies to suitable remote, USB or cloud destinations. These functions address different recovery needs. RAID and snapshots on the same appliance do not protect against every theft, hardware event or compromised administrator account. Keep a protected independent backup and test that important data can be restored. Install with power, cooling and service access in mind RAIL-B02 is the verified optional appliance rail kit and is purchased separately. Confirm mounting depth, rack load, ventilation and rear cable clearance before installation. Redundant power supplies support selected supply faults when wired appropriately, but do not replace a suitable electrical design, UPS or recovery plan. Leave the drive and service areas accessible for maintenance. Summary TS-1232PXU-RP is a practical choice for organisations building managed rack storage around shared data, backup and supported applications. Match drives, memory and network resources to the actual workload, and expand through a verified host connection. Appropriate monitoring, protected recovery copies and a serviceable rack installation complete the design. Which drives fit the NAS?ExpandCollapse Use qualified SATA drives for the internal bays. Match the exact model, firmware, sector format and endurance to the proposed RAID and workload. Seagate IronWolf Pro is the recommended NAS HDD family here, subject to exact drive qualification; the recommendation does not automatically qualify every capacity or revision. Is 10GbE built in?ExpandCollapse Yes. Two SFP+ 10GbE ports and two 2.5GbE RJ45 ports are built in. Optics or direct-attach cables, suitable switches and client adapters are separate requirements. Actual transfer speed depends on the processor, drives, network and workload. Can I upgrade memory?ExpandCollapse 1 DDR4 UDIMM slot; maximum 16GB using one supported 16GB replacement module. How many cameras can it record?ExpandCollapse The QVR Surveillance QTS estimate is up to 44 channels under the stated 12-drive RAID 6 recording-only scenario. QVR Surveillance QTS recording-only estimate at 1080p H.264, 30 fps and 4.096 Mb/s per camera, with all stated SATA bays populated in RAID 6; no AI analysis or local playback. This is a planning estimate, not a certified fixed maximum. Drive performance, retention, network and concurrent workloads affect capacity. QVR Pro includes 8 recording channels on supported QTS. QVR Surveillance provides 2 base channels plus 6 after eligible registration, giving 8 total. Extra channels require the appropriate application licences and a validated recording design. Which rails and expansion units should I choose?ExpandCollapse RAIL-B02 is the verified optional appliance rail kit. The specifications list supported external enclosures, limits and required adapters/cables. Confirm rack depth, PCIe clearance and the complete supported configuration before purchase. Does RAID or redundant power replace a backup?ExpandCollapse No. RAID and redundant supplies address selected hardware faults. Keep a protected independent backup, suitable power protection and a tested recovery process for the complete application.
Mga Dagdag na Produkto (3)
Maaaring kunin sa 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
QNAP TS-1232PXU-RP 12-Bay 10GbE Rackmount NAS
Paglalarawan
A practical rack platform for shared data and recovery
QNAP TS-1232PXU-RP brings built-in 10GbE networking, flexible SATA storage and redundant power into a business rack platform. Its ARM processor suits managed file sharing, backup and supported surveillance or container applications when the workload is sized appropriately. Plan the network path, drive arrangement and recovery copies together, then use a verified expansion route when more external capacity is needed. The right design makes its connectivity useful without assuming every workload can run at line speed.
Highlights
Storage for shared business data
- Hot-swappable SATA HDD or SSD storage in a rack chassis.
- Snapshot and backup tools for supported storage configurations.
Connected to the workload
- Dual 10GbE SFP+ and dual 2.5GbE networking built in.
- ARM-compatible applications and containers.
A considered installation
- Redundant power supplies and optional RAIL-B02 mounting.
- Verified enclosure expansion with the required host connection.
Key Features
Choose drives for the complete workload
The hot-swappable SATA bays accept compatible hard drives or SATA SSDs, allowing storage to be matched to shared files, backups or active application data. Select the exact drive model, firmware, sector format and endurance against the proposed RAID design. Internal bays are not SAS or U.2 NVMe bays. M.2 storage requires a compatible optional PCIe adapter rather than being included as a built-in slot.
Build the network path around real access
Dual SFP+ 10GbE connections are built in alongside two 2.5GbE ports. Suitable optics or direct-attach cables, switches and client adapters remain separate requirements. The ARM processor, drives and workload determine achieved throughput. Link aggregation can serve multiple flows, but does not automatically combine ports for one ordinary file transfer.
Match memory and applications with care
The platform runs supported ARM applications and compatible container images. It is not a substitute for an x86 virtualisation host, and x86-only software should not be assumed to run. Upgrading memory means replacing the module in its single slot with a supported larger module. Reserve resources for file services and backup before adding applications or recording cameras.
Choose the storage operating system deliberately
QTS supplies the storage and application environment for this ARM appliance. Its EXT4 storage, supported volume and LUN snapshots, access controls and backup applications can form part of a practical managed-data design. Check current application support before choosing a container image or surveillance deployment. No QuTS hero or x86 virtual-machine entitlement is implied.
Keep recovery copies outside the appliance
Snapshots can preserve earlier states of supported volumes or LUNs, while Hybrid Backup Sync coordinates copies to suitable remote, USB or cloud destinations. These functions address different recovery needs. RAID and snapshots on the same appliance do not protect against every theft, hardware event or compromised administrator account. Keep a protected independent backup and test that important data can be restored.
Install with power, cooling and service access in mind
RAIL-B02 is the verified optional appliance rail kit and is purchased separately. Confirm mounting depth, rack load, ventilation and rear cable clearance before installation. Redundant power supplies support selected supply faults when wired appropriately, but do not replace a suitable electrical design, UPS or recovery plan. Leave the drive and service areas accessible for maintenance.
Summary
TS-1232PXU-RP is a practical choice for organisations building managed rack storage around shared data, backup and supported applications. Match drives, memory and network resources to the actual workload, and expand through a verified host connection. Appropriate monitoring, protected recovery copies and a serviceable rack installation complete the design.
Which drives fit the NAS?
Use qualified SATA drives for the internal bays. Match the exact model, firmware, sector format and endurance to the proposed RAID and workload. Seagate IronWolf Pro is the recommended NAS HDD family here, subject to exact drive qualification; the recommendation does not automatically qualify every capacity or revision.
Is 10GbE built in?
Yes. Two SFP+ 10GbE ports and two 2.5GbE RJ45 ports are built in. Optics or direct-attach cables, suitable switches and client adapters are separate requirements. Actual transfer speed depends on the processor, drives, network and workload.
Can I upgrade memory?
1 DDR4 UDIMM slot; maximum 16GB using one supported 16GB replacement module.
How many cameras can it record?
The QVR Surveillance QTS estimate is up to 44 channels under the stated 12-drive RAID 6 recording-only scenario. QVR Surveillance QTS recording-only estimate at 1080p H.264, 30 fps and 4.096 Mb/s per camera, with all stated SATA bays populated in RAID 6; no AI analysis or local playback. This is a planning estimate, not a certified fixed maximum. Drive performance, retention, network and concurrent workloads affect capacity. QVR Pro includes 8 recording channels on supported QTS. QVR Surveillance provides 2 base channels plus 6 after eligible registration, giving 8 total. Extra channels require the appropriate application licences and a validated recording design.
Which rails and expansion units should I choose?
RAIL-B02 is the verified optional appliance rail kit. The specifications list supported external enclosures, limits and required adapters/cables. Confirm rack depth, PCIe clearance and the complete supported configuration before purchase.
Does RAID or redundant power replace a backup?
No. RAID and redundant supplies address selected hardware faults. Keep a protected independent backup, suitable power protection and a tested recovery process for the complete application.
Mga detalye
QNAP TS-1232PXU-RP 12-Bay 10GbE Rackmount NAS
The QNAP TS-1232PXU-RP combines a 64-bit ARM processor and built-in 10GbE SFP+ networking with hot-swappable SATA bays and redundant power supplies. It provides a managed platform for shared business data, backup services and supported applications. PCIe expansion and compatible external enclosures offer additional flexibility. Select the drive arrangement, memory, network path and recovery design together, and check the required optional rails and accessories before installing the system in a server rack.
| Specification | Details |
|---|---|
| Hardware and connectivity | |
| Processor | AnnapurnaLabs Alpine AL324; 64-bit ARM Cortex-A57; 4 cores; 1.7GHz. |
| Factory memory | 4GB DDR4 UDIMM. |
| Memory expansion | 1 DDR4 UDIMM slot; maximum 16GB using one supported 16GB replacement module. |
| System flash | 512MB with dual-boot OS protection. |
| Drive bays | 12 × SATA 6Gb/s bays for compatible 3.5-inch HDDs or 2.5-inch SATA SSDs; hot-swappable. Qualified 2.5-inch SATA HDDs are also supported. |
| M.2 storage | Optional compatible QM2/PCIe adapter required; no built-in M.2 slot. M.2 SSD hot-swap is not supported. |
| Network interfaces | 2 × 10GbE SFP+ plus 2 × 2.5GBASE-T RJ45. Suitable SFP+ optics or DACs and matching network equipment are separate requirements. |
| PCIe expansion | 1 × PCIe Gen2 x2; slot bandwidth can restrict 10GbE performance and card workloads. Maximum published card dimensions 220 × 68.9 × 18.76mm. |
| USB interfaces | 4 × USB 3.2 Gen1 5Gb/s. |
| Display output | No built-in HDMI output. |
| Storage and software | |
| Operating system | QTS with EXT4 on a 64-bit ARM platform. No QuTS hero or x86 virtual-machine support is promised. |
| RAID | QTS Single, JBOD and RAID 0/1/5/6/10/50/60 where minimum drive counts are met. |
| RAID groups | New parity RAID groups/subgroups are limited to 16 drives where applicable; use a supported multiple-group layout for a larger expansion design. |
| Snapshots | QTS volume/LUN snapshots, retention and supported replication; actual limits depend on installed memory and storage configuration. |
| Backup and sync | Hybrid Backup Sync for supported local, remote and cloud destinations; Qsync and supported client backup functions. Cloud storage and third-party services may need separate subscriptions. |
| File sharing and access | SMB, NFS, FTP/SFTP, directory integration, shared-folder permissions and encrypted connections. |
| Accounts and shared folders | QTS up to 4,096 local users, 512 groups and 512 shared folders; actual workload limits and OS-specific limits apply. |
| iSCSI storage | QTS thick/thin file-based and block-based LUNs; supported snapshots, host integration and multipath depend on the complete configuration. |
| Applications | Container Station with supported ARM images; no x86 Virtualization Station promise. |
| Concurrent SMB connections | Up to 700 with maximum memory; this is not a factory-configuration workload guarantee. |
| Surveillance | |
| Included camera channels | QVR Pro includes 8 recording channels on supported QTS. QVR Surveillance provides 2 base channels plus 6 after eligible registration, giving 8 total. Extra channels require the appropriate application licences and a validated recording design. |
| Recording capacity | QVR Surveillance QTS planning estimate up to 44 recording channels with the stated factory-memory configuration and 12-drive RAID 6 scenario. |
| Capacity conditions | QVR Surveillance QTS recording-only estimate at 1080p H.264, 30 fps and 4.096 Mb/s per camera, with all stated SATA bays populated in RAID 6; no AI analysis or local playback. This is a planning estimate, not a certified fixed maximum. Drive performance, retention, network and concurrent workloads affect capacity. |
| Application distinction | QVR Pro and QVR Surveillance are separate applications with different licensing and supported limits. QVR Pro on ARM includes 8 channels and has a 16-channel software ceiling with appropriate licensing; this is separate from the QVR Surveillance estimate and is not a performance guarantee. |
| Compatible expansion | |
| USB enclosures | Up to 1 × TL-D800C or TL-R1200C-RP; up to 2 × TR-002, TR-004 or TR-004U. TR enclosures use separate pools/volumes. The built-in USB connection operates at USB 3.2 Gen1 speed. |
| SATA enclosures | Up to 1 × TL-D400S, TL-D800S, TL-D1600S, TL-R400S or TL-R1200S-RP. A matching QXP SATA HBA and enclosure-specific SFF-8088/SFF-8644 cables are required; verify card fit and available PCIe lanes. |
| Expansion planning | Limits apply per supported expansion type and are not additive. Verify host-card compatibility, bracket/slot clearance, BIOS/firmware, memory and exact cable requirements. Expansion does not change the interface accepted by internal drive bays. |
| Physical and electrical | |
| Form factor | 2U rackmount. |
| Dimensions H × W × D | 88.6 × 432 × 511mm, excluding ear hooks and PSU protrusions; allow cable and service clearance. |
| Weight | Net 12.94kg; gross 14.94kg. |
| Power | 2 × 250W redundant supplies; AC 100–240V. |
| Typical consumption | 83.57W under the manufacturer fully populated test configuration; actual use varies. |
| Cooling | 2 × 70mm system fans. |
| Environment | Operating 0–40°C; storage −20–70°C; 5–95% non-condensing relative humidity, wet-bulb 27°C. |
| Warranty | 3 years. |
| Rails and package | RAIL-B02 is optional and purchased separately. Package includes NAS, 2 power cords, Ethernet cable, drive-mounting hardware and quick installation guide. Drives, rail kit and optional cards are not included. |
Mga Dagdag na Produkto
NASCare Extended Warranty with Loaner Unit for 9-12 Bays
QNAP Rail Kit C01/B01/B02/A02-90/A03-57/E02/E03/S01/S02
