Insta360 Head Strap
Keep Your Hands Free and Your View in the Frame Record from a viewpoint that follows where you look. Insta360 Head Strap positions a compatible camera for hands-free first-person capture, with an adjustable non-slip arrangement designed to help it sit securely during suitable activities. Front and rear mounting positions can support two camera views when the complete setup meets the stated load limit. Adjust the fit, select the correct camera interface and review a short test clip before relying on the recording for the full session. Highlights Hands-free first-person camera positioning. Adjustable fit for head circumferences of 46–70 cm. Non-slip contact design with an additional chin strap. Front and rear mounting positions for up to two cameras. Manufacturer maximum camera load of 250 g. Key Features Show the Direction You Are Looking A camera positioned on the head can communicate an activity from the wearer’s viewpoint while keeping the hands available. Set the angle before recording and check a sample clip. Head movement changes the composition, so a considered fit and viewpoint are more useful than simply attaching the camera and starting a long recording. Adjust the Fit for the Session The strap adjusts for head circumferences of 46–70 cm. Position the bands so that the assembly feels secure and balanced, then use the additional chin strap as instructed. The non-slip design helps support the fit, but it does not replace checking the strap tension and camera fastening before use. Record Forward and Backward Views Front and rear mounting positions allow up to two cameras to capture different perspectives. A second camera is separate equipment, and both the mounting arrangement and stated 250 g load limit still apply. Mounting two cameras does not synchronise their recordings or combine the files automatically. Match the Camera and Adapter GO 3 and GO 3S use their compatible Quick Release Mount, while GO 2 requires the Action Mount Adapter. GO Ultra needs an approved mounting arrangement such as the specified adapter, Magnetic Mount or Action Mount. Check the actual interface and supplied parts rather than treating every listed camera as a direct fit. Carry a Focused Mounting Kit The package includes the Head Strap, a Mount Extension, a 1/4-inch Mount Adapter and two 1/4-inch Thumb Screws. These parts provide the intended starting arrangement for a supported camera. Keep the small mounting components together, and inspect the strap and fittings after use before packing them for the next session. Summary Insta360 Head Strap is a compact way to prepare a hands-free viewpoint with a compatible camera. Confirm the head-size range and load limit, adjust the fit and use the correct interface. Front and rear mounting add recording choices while keeping the camera, adapter and file-handling requirements clear. Frequently Asked Questions What Head Sizes Does It Fit?ExpandCollapse The manufacturer specifies an adjustable head circumference of 46–70 cm. Check the complete fit with the intended camera attached, and follow the instructions for the additional chin strap. Do not assume a comfortable fit from the measurement alone. Can I Mount Two Cameras?ExpandCollapse Front and rear positions support up to two camera views, subject to the stated 250 g camera-load limit and the intended mounting arrangement. Cameras are supplied separately. The strap does not synchronise recording or merge the resulting files. Will GO Ultra, GO 3 or GO 3S Attach Directly?ExpandCollapse Check the camera interface. GO 3 and GO 3S require their compatible Quick Release Mount. GO Ultra uses an approved arrangement such as the specified 3-Prong to 1/4-inch Adapter, Magnetic Mount or Action Mount. GO 2 uses the Action Mount Adapter. What Is Included?ExpandCollapse The package includes one Head Strap, one Mount Extension, one 1/4-inch Mount Adapter and two 1/4-inch Thumb Screws. The camera and any additional model-specific mounting components are separate. Does It Stabilise the Video?ExpandCollapse The strap positions and supports the camera. Video stabilisation, image quality, recording limits and editing functions depend on the camera and its settings. Make a short test recording to check framing, movement and fit before the main session.
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
Insta360 Head Strap
Paglalarawan
Keep Your Hands Free and Your View in the Frame
Record from a viewpoint that follows where you look. Insta360 Head Strap positions a compatible camera for hands-free first-person capture, with an adjustable non-slip arrangement designed to help it sit securely during suitable activities. Front and rear mounting positions can support two camera views when the complete setup meets the stated load limit. Adjust the fit, select the correct camera interface and review a short test clip before relying on the recording for the full session.
Highlights
- Hands-free first-person camera positioning.
- Adjustable fit for head circumferences of 46–70 cm.
- Non-slip contact design with an additional chin strap.
- Front and rear mounting positions for up to two cameras.
- Manufacturer maximum camera load of 250 g.
Key Features
Show the Direction You Are Looking
A camera positioned on the head can communicate an activity from the wearer’s viewpoint while keeping the hands available. Set the angle before recording and check a sample clip. Head movement changes the composition, so a considered fit and viewpoint are more useful than simply attaching the camera and starting a long recording.
Adjust the Fit for the Session
The strap adjusts for head circumferences of 46–70 cm. Position the bands so that the assembly feels secure and balanced, then use the additional chin strap as instructed. The non-slip design helps support the fit, but it does not replace checking the strap tension and camera fastening before use.
Record Forward and Backward Views
Front and rear mounting positions allow up to two cameras to capture different perspectives. A second camera is separate equipment, and both the mounting arrangement and stated 250 g load limit still apply. Mounting two cameras does not synchronise their recordings or combine the files automatically.
Match the Camera and Adapter
GO 3 and GO 3S use their compatible Quick Release Mount, while GO 2 requires the Action Mount Adapter. GO Ultra needs an approved mounting arrangement such as the specified adapter, Magnetic Mount or Action Mount. Check the actual interface and supplied parts rather than treating every listed camera as a direct fit.
Carry a Focused Mounting Kit
The package includes the Head Strap, a Mount Extension, a 1/4-inch Mount Adapter and two 1/4-inch Thumb Screws. These parts provide the intended starting arrangement for a supported camera. Keep the small mounting components together, and inspect the strap and fittings after use before packing them for the next session.
Summary
Insta360 Head Strap is a compact way to prepare a hands-free viewpoint with a compatible camera. Confirm the head-size range and load limit, adjust the fit and use the correct interface. Front and rear mounting add recording choices while keeping the camera, adapter and file-handling requirements clear.
Frequently Asked Questions
What Head Sizes Does It Fit?
The manufacturer specifies an adjustable head circumference of 46–70 cm. Check the complete fit with the intended camera attached, and follow the instructions for the additional chin strap. Do not assume a comfortable fit from the measurement alone.
Can I Mount Two Cameras?
Front and rear positions support up to two camera views, subject to the stated 250 g camera-load limit and the intended mounting arrangement. Cameras are supplied separately. The strap does not synchronise recording or merge the resulting files.
Will GO Ultra, GO 3 or GO 3S Attach Directly?
Check the camera interface. GO 3 and GO 3S require their compatible Quick Release Mount. GO Ultra uses an approved arrangement such as the specified 3-Prong to 1/4-inch Adapter, Magnetic Mount or Action Mount. GO 2 uses the Action Mount Adapter.
What Is Included?
The package includes one Head Strap, one Mount Extension, one 1/4-inch Mount Adapter and two 1/4-inch Thumb Screws. The camera and any additional model-specific mounting components are separate.
Does It Stabilise the Video?
The strap positions and supports the camera. Video stabilisation, image quality, recording limits and editing functions depend on the camera and its settings. Make a short test recording to check framing, movement and fit before the main session.
Mga detalye
Insta360 Head Strap
Insta360 Head Strap provides an adjustable hands-free camera position with front and rear mounting options. Its head-size range and camera-load limit are distinct checks: a strap that fits the wearer still needs an appropriate camera and interface. Use the included mounting components where suitable, add the correct model-specific fitting when required and confirm the assembly before recording. The strap does not add electronic stabilisation or recording synchronisation; those functions remain dependent on the cameras and the recording workflow.
| Specification | Details |
|---|---|
| Fit and Recording | |
| Head Circumference | Adjustable 46–70 cm |
| Camera Positions | Front and rear; up to two cameras |
| Maximum Camera Load | 250 g, according to the manufacturer guide |
| Fit Features | Non-slip arrangement and additional chin strap |
| Construction | |
| Materials | Polycarbonate (PC) and other plastics |
| Adjustment | Adjust the bands and camera angle before recording |
| Video Functions | Determined by the attached camera; no electronic stabilisation or synchronisation supplied by the strap |
| Camera Interfaces | |
| GO 3 and GO 3S | Compatible Quick Release Mount required |
| GO 2 | Action Mount Adapter required |
| GO Ultra | Approved 3-Prong to 1/4-inch Adapter, GO Ultra Magnetic Mount or Action Mount arrangement |
| Other Cameras | Use the specified interface for a manufacturer-listed compatible model |
| Included Items | |
| In the Box | 1 Head Strap, 1 Mount Extension, 1 quarter-inch Mount Adapter and 2 quarter-inch Thumb Screws |
| Separate Equipment | Camera and additional model-specific mounting components |