Insta360 GO Ultra Dive Case

Take the Story Below the Surface Bring GO Ultra into a different world of colour, movement and perspective. Insta360 GO Ultra Dive Case encloses the camera and its Action Pod in a purpose-built underwater housing, with protection to a manufacturer-specified depth of 60 m. A glass optical window, dual buckle lock and rubber seal support a considered diving setup, while the supplied adapters provide landscape and portrait mounting options. Prepare the housing carefully, choose suitable underwater accessories and give the scene your full attention. Highlights Dedicated housing for Insta360 GO Ultra with its Action Pod. Manufacturer-specified underwater protection to 60 m. Glass optical window with hydrophobic and oil-resistant treatment. Dual buckle lock and rubber seal. Built-in cold shoe and supplied L-Shape Adapter for portrait mounting. Includes anti-fog inserts, mounting fittings and a protective pouch. Key Features Go Beyond the Surface The dedicated housing allows a correctly installed GO Ultra and Action Pod to be used underwater to the manufacturer's specified 60 m limit. It gives the combined camera setup an enclosure designed for diving, rather than relying on the water resistance of an individual component. Check the complete assembly and follow the case and camera instructions before entering the water. Keep the Optical Path Clear The glass optical window uses hydrophobic and oil-resistant treatment to support underwater imaging. Its condition still matters: keep the glass clean and protect it from scratches during transport and preparation. The supplied protective pouch provides a practical place to carry the empty housing between sessions, with the camera and mounting equipment organised separately. Prepare the Seal and Lock A dual buckle mechanism and rubber seal close the housing around the camera assembly. Before fitting the equipment, inspect the enclosure and sealing surfaces, position the anti-fog inserts as instructed and make sure the buckles close correctly. Secure closure is part of preparing every session; it should not be treated as an unconditional guarantee against water ingress. Choose Landscape or Portrait Mounting Use the supplied 1/4-inch to three-prong adapter for the intended landscape arrangement, or the L-Shape Adapter for portrait mounting. This lets you prepare the physical orientation around the footage you want to capture. Fit the anti-slip rings and screws as shown in the guide, then check the connection before attaching a suitable grip or mount. Add a Suitable Underwater Light The built-in cold shoe provides a connection for an appropriate fill light or other compatible accessory. Consider the complete underwater setup, including the light's own depth limit, attachment and power requirements. A mounting connection alone does not establish that an accessory is suitable for the same depth as the housing. Keep Practical Controls Within Reach The housing provides access to its shutter, power and Q controls while the camera and Action Pod remain enclosed. Fit the camera assembly in the orientation shown in the guide and check the control operation before the session. The case is supplied with the mounting adapters and small fittings needed for its illustrated arrangements; the camera, Action Pod, grip and light are separate. Summary Insta360 GO Ultra Dive Case brings the camera and Action Pod into one dedicated underwater housing, with glass optics, secure closure and useful mounting choices. Prepare the seal, anti-fog inserts and fittings carefully, then match every additional accessory to the planned depth and activity. Frequently Asked Questions Which Camera Fits This Dive Case?ExpandCollapse It is designed for Insta360 GO Ultra with the camera installed in its Action Pod. Follow the illustrated fitting sequence. The camera and Action Pod are not included, and a housing for another GO model should not be assumed to share the same fit. How Deep Can It Be Used?ExpandCollapse The manufacturer specifies underwater protection to 60 m when correctly assembled and used as instructed. Inspect the housing, seal, buckles and fittings before use. The depth rating of a separate light, grip or other accessory must also suit the intended session. Can I Mount It Vertically?ExpandCollapse Yes. The supplied L-Shape Adapter supports the illustrated portrait arrangement. The package also includes a 1/4-inch to three-prong adapter for the intended landscape setup. Fit the correct adapter, anti-slip rings and screws and check the connection before use. What Is Included?ExpandCollapse The package contains one Dive Case, one protective pouch, one L-Shape Adapter, one 1/4-inch to three-prong adapter, two thumb screws, four anti-slip rings and nine anti-fog inserts. The camera, Action Pod, grip, mount and fill light are separate purchases. How Should I Prepare the Camera Before a Dive?ExpandCollapse Open and inspect the housing, place the anti-fog inserts as shown, insert GO Ultra with its Action Pod and close the buckles correctly. Fit the required adapter and anti-slip rings, then check the controls and complete mounting arrangement. Follow the current case and camera instructions for the intended underwater activity. Magbasa pa