Edifier S3000MKII 256W RMS Premium 2.0 Bluetooth and USB Speaker System

A Dedicated Stereo System With Freedom Between The Speakers The Edifier S3000MKII combines substantial bookshelf speakers with built-in amplification and a wireless link between the two cabinets. Planar magnetic tweeters, aluminium-diaphragm mid-low drivers and high-resolution digital inputs make it a considered choice for a dedicated music space or an expanded desktop setup. Balanced XLR, line-level analogue, USB, optical, coaxial and Bluetooth connections provide several ways to bring sources together. Each speaker still requires its own mains connection, so placement starts with the room and the available power points. Highlights An Active Stereo Foundation 256W RMS total output from two independently powered speakers. Planar magnetic tweeters and 6.5-inch mid-low drivers. Connections For Different Sources Balanced XLR and analogue Line In alongside USB, optical and coaxial audio. Bluetooth 5.0 with Qualcomm aptX HD when the source supports that codec. Placement And Everyday Control A dedicated 5.8GHz wireless speaker link replaces the inter-speaker audio cable. Rear controls, an infrared remote, an OLED display and EDIFIER ConneX support. Key Features Planar Treble And A Substantial Mid-Low Driver Each cabinet pairs a horn-loaded planar magnetic tweeter with a long-throw aluminium-diaphragm mid-low driver. Separate amplification serves the frequency ranges, while the published system response extends from 38Hz to 40kHz. This architecture suits listening that calls for both stereo separation and a broad frequency range. Position the cabinets around the listening seat rather than relying on the power figure to compensate for an unsuitable layout. Wireless Linking With Clear Power Requirements The two active speakers communicate through a proprietary 5.8GHz connection. This removes the signal cable normally running between a speaker pair and gives more freedom to arrange furniture or speaker positions. It does not make either cabinet battery powered. Connect both supplied mains leads and keep the wireless path practical; the speakers are paired at the factory, with a manual pairing procedure available if needed. A Direct Digital Route From A Computer The USB Type-B input receives digital audio from a compatible computer through USB Audio Class 2.0. The manual supports Windows and Mac setup and specifies a Windows driver for high-resolution playback. Select the speakers as the computer audio output and choose an appropriate sample rate in the host settings. The supplied USB cable is for audio streaming, not charging another device. Balanced And Conventional Sources In One System Balanced XLR inputs suit compatible source equipment, while RCA Line In accommodates a conventional line-level output. Optical and coaxial inputs provide further digital connection choices. Match the cable and output format to the source rather than assuming every television, console or turntable connects directly. A turntable with a phono-level output requires a suitable phono preamplifier before using Line In; XLR and coaxial cables are purchased separately. Keep Wired And Wireless Resolution In Perspective Supported digital inputs accept audio up to 24bit/192kHz, with the listed sample rates determined by the input and source settings. Bluetooth aptX HD supports up to 24bit/48kHz with a compatible transmitter, while the dedicated link between cabinets carries audio up to 24bit/96kHz. These describe different parts of the signal path. Source files, playback software and the chosen connection still determine the material delivered to the system. Controls That Fit A Settled Listening Space Adjust listening level, input, treble and bass at the right speaker, or use the supplied infrared remote from your seat. The OLED window shows key operating information. Classic, Monitor, Dynamic and Vocal presets offer different listening presentations, while Custom settings are available through EDIFIER ConneX. App control complements the physical controls; it should not be confused with built-in Wi-Fi music streaming or a network multi-room platform. Summary Choose the Edifier S3000MKII for a substantial active stereo system with flexible source connections and no audio cable between the cabinets. Its driver arrangement, digital inputs and practical controls suit a room where music deserves a deliberate setup. Plan suitable support, access to mains power for both speakers and the correct connections for the equipment you intend to use. Frequently Asked Questions Do both S3000MKII speakers need mains power?ExpandCollapse Yes. Both cabinets are active speakers and each uses a supplied mains cable. The wireless connection carries audio between them; it does not provide power. Can I connect a Windows PC or Mac by USB?ExpandCollapse Yes. The USB Type-B input supports USB Audio Class 2.0 audio from compatible computers. The manual specifies the Edifier Windows driver for high-resolution playback. Select the speakers as the computer audio output and use supported playback settings. Is Bluetooth audio the same as 192kHz USB audio?ExpandCollapse No. The supported USB, optical and coaxial paths accept up to 24bit/192kHz, while Bluetooth aptX HD supports up to 24bit/48kHz with a compatible source. The inter-speaker wireless link is a separate path rated up to 24bit/96kHz. Can I connect a turntable directly?ExpandCollapse Use RCA Line In only when the turntable has a suitable line-level output. A turntable that provides only phono-level output needs a compatible phono preamplifier first. Does wireless linking mean Wi-Fi streaming?ExpandCollapse No. The proprietary 5.8GHz connection links the two speakers. Music reaches the system through its Bluetooth or wired audio inputs. EDIFIER ConneX provides playback and sound-setting control; it is not a claim of built-in Wi-Fi streaming. Magbasa pa