D-Link DIS-210G-12 12-Port Gigabit Industrial Managed Switch
Managed Connectivity Built for the Industrial Edge The DIS-210G-12 brings eight Gigabit Ethernet connections and four Gigabit SFP slots into a compact industrial cabinet. It connects controllers, cameras and other networked equipment while leaving room for separately chosen fibre links between protected locations. A fanless IP40 metal housing, DIN-rail mounting and a −40°C to 75°C operating range support installations beyond a typical office. This data-only model connects independently powered equipment. VLANs, static routing, Ethernet ring protection and network diagnostics give the administrator useful control at the edge. The external DC supply and optical modules are selected separately for the actual installation. Highlights Industrial Access 8 × 10/100/1000BASE-T and 4 × Gigabit SFP slots. 24 Gbps switching capacity and up to 17.85 Mpps forwarding. Fanless IP40 metal housing and DIN-rail mounting. Power and Environment Dual 12–55 V DC terminal-block inputs; DC supply purchased separately. Non-PoE model for separately powered equipment. −40°C to 75°C operation. Network Control VLANs, IPv4/IPv6 static routing and ERPS. Web interface, CLI, security controls and Ethernet OAM. 5-year warranty. Key Features A Compact Industrial Installation The metal enclosure mounts on a DIN rail inside an appropriate equipment cabinet. Fanless cooling removes a moving part and helps keep the installation quiet. IP40 describes the enclosure protection; it is not a waterproof outdoor rating. Provide suitable protection from moisture, grounding and ventilation for the site. Eight Copper Connections and Four Fibre Choices Eight Gigabit copper ports connect nearby devices, while four dedicated SFP slots support separately specified Gigabit optical links. The SFP slots are not 10GbE uplinks. Match supported optics, fibre type, wavelength and link loss at both ends rather than selecting a module by connector shape alone. Size the Power System Deliberately Dual 12–55 V DC terminal inputs support a redundant-power arrangement when two appropriate external sources are installed. A DC supply is not included. Select an adequately rated industrial supply and allow for temperature derating, installation headroom and the required protective grounding. Clear Data-Only Operation The copper ports carry data and do not provide PoE output. This model suits controllers, workstations and other equipment with their own power arrangement. A separately selected compatible injector is needed if an endpoint requires power over Ethernet. Control Traffic and Recovery VLANs separate services, while static routing connects selected local networks. ERPS, spanning-tree protocols and link aggregation support a planned resilient topology. Configure and test the complete network, including upstream equipment; an extra cable alone does not establish safe failover or replace the network security policy. Useful Tools When a Link Needs Attention The web interface and CLI provide configuration access. Cable diagnostics, logs and Ethernet OAM help investigate faults, and access controls restrict management according to the site policy. Set secure credentials, use supported firmware and plan how the switch will be reached for maintenance before installing it in a remote cabinet. Summary The DIS-210G-12 combines managed Gigabit access, four fibre uplinks and industrial construction for independently powered equipment. Specify the external DC supply, supported optics and cabinet protection alongside the switch for a complete installation. Frequently Asked Questions Is a Power Supply Included?ExpandCollapse No. A suitable external 12–55 V DC supply is required. Two suitable sources can be used with the dual inputs for a planned redundant-power arrangement. What Is the PoE Port Layout?ExpandCollapse This model has no PoE output. All eight copper ports are for data connections to separately powered devices. Are the Fibre Slots 10GbE?ExpandCollapse No. The four SFP slots are Gigabit connections. Select compatible Gigabit SFP modules and the correct fibre for the intended distance. Can It Be Installed Outdoors?ExpandCollapse Install it inside a suitable protective enclosure. The IP40 housing and industrial temperature range do not make the switch waterproof. Does It Support Ring Redundancy?ExpandCollapse Yes. ERPS and spanning-tree protocols support planned resilient network designs. The topology and compatible equipment must be configured and failover tested. Does It Include Cloud Management?ExpandCollapse This offer is an industrial managed switch with web and CLI administration. It is not presented as a D-Lite Cloud model or as including a separate cloud-management subscription.
Add-ons (1)
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
D-Link DIS-210G-12 12-Port Gigabit Industrial Managed Switch
Paglalarawan
Managed Connectivity Built for the Industrial Edge
The DIS-210G-12 brings eight Gigabit Ethernet connections and four Gigabit SFP slots into a compact industrial cabinet. It connects controllers, cameras and other networked equipment while leaving room for separately chosen fibre links between protected locations. A fanless IP40 metal housing, DIN-rail mounting and a −40°C to 75°C operating range support installations beyond a typical office.
This data-only model connects independently powered equipment. VLANs, static routing, Ethernet ring protection and network diagnostics give the administrator useful control at the edge. The external DC supply and optical modules are selected separately for the actual installation.
Highlights
Industrial Access
- 8 × 10/100/1000BASE-T and 4 × Gigabit SFP slots.
- 24 Gbps switching capacity and up to 17.85 Mpps forwarding.
- Fanless IP40 metal housing and DIN-rail mounting.
Power and Environment
- Dual 12–55 V DC terminal-block inputs; DC supply purchased separately.
- Non-PoE model for separately powered equipment.
- −40°C to 75°C operation.
Network Control
- VLANs, IPv4/IPv6 static routing and ERPS.
- Web interface, CLI, security controls and Ethernet OAM.
- 5-year warranty.
Key Features
A Compact Industrial Installation
The metal enclosure mounts on a DIN rail inside an appropriate equipment cabinet. Fanless cooling removes a moving part and helps keep the installation quiet. IP40 describes the enclosure protection; it is not a waterproof outdoor rating. Provide suitable protection from moisture, grounding and ventilation for the site.
Eight Copper Connections and Four Fibre Choices
Eight Gigabit copper ports connect nearby devices, while four dedicated SFP slots support separately specified Gigabit optical links. The SFP slots are not 10GbE uplinks. Match supported optics, fibre type, wavelength and link loss at both ends rather than selecting a module by connector shape alone.
Size the Power System Deliberately
Dual 12–55 V DC terminal inputs support a redundant-power arrangement when two appropriate external sources are installed. A DC supply is not included. Select an adequately rated industrial supply and allow for temperature derating, installation headroom and the required protective grounding.
Clear Data-Only Operation
The copper ports carry data and do not provide PoE output. This model suits controllers, workstations and other equipment with their own power arrangement. A separately selected compatible injector is needed if an endpoint requires power over Ethernet.
Control Traffic and Recovery
VLANs separate services, while static routing connects selected local networks. ERPS, spanning-tree protocols and link aggregation support a planned resilient topology. Configure and test the complete network, including upstream equipment; an extra cable alone does not establish safe failover or replace the network security policy.
Useful Tools When a Link Needs Attention
The web interface and CLI provide configuration access. Cable diagnostics, logs and Ethernet OAM help investigate faults, and access controls restrict management according to the site policy. Set secure credentials, use supported firmware and plan how the switch will be reached for maintenance before installing it in a remote cabinet.
Summary
The DIS-210G-12 combines managed Gigabit access, four fibre uplinks and industrial construction for independently powered equipment. Specify the external DC supply, supported optics and cabinet protection alongside the switch for a complete installation.
Frequently Asked Questions
Is a Power Supply Included?
No. A suitable external 12–55 V DC supply is required. Two suitable sources can be used with the dual inputs for a planned redundant-power arrangement.
What Is the PoE Port Layout?
This model has no PoE output. All eight copper ports are for data connections to separately powered devices.
Are the Fibre Slots 10GbE?
No. The four SFP slots are Gigabit connections. Select compatible Gigabit SFP modules and the correct fibre for the intended distance.
Can It Be Installed Outdoors?
Install it inside a suitable protective enclosure. The IP40 housing and industrial temperature range do not make the switch waterproof.
Does It Support Ring Redundancy?
Yes. ERPS and spanning-tree protocols support planned resilient network designs. The topology and compatible equipment must be configured and failover tested.
Does It Include Cloud Management?
This offer is an industrial managed switch with web and CLI administration. It is not presented as a D-Lite Cloud model or as including a separate cloud-management subscription.
Mga detalye
D-Link DIS-210G-12 12-Port Gigabit Industrial Managed Switch
The DIS-210G-12 is a twelve-port industrial managed switch with eight Gigabit copper connections and four dedicated Gigabit SFP slots. It is a data-only model for equipment with its own power arrangement. The fanless IP40 enclosure mounts on a DIN rail and supports a −40°C to 75°C operating range. Select supported optics and suitable cabinet protection for the site. The DC supply, optical modules and network cabling are purchased separately.
| Specification | Details |
|---|---|
| Interfaces and Performance | |
| Copper Access | 8 × 10/100/1000BASE-T |
| Fibre Uplinks | 4 × Gigabit SFP; modules sold separately |
| Switching and Forwarding | 24 Gbps; up to 17.85 Mpps |
| MAC Address Table | 8K entries |
| Jumbo Frames | Up to 9K bytes |
| System Memory | 16 MB flash; 128 MB DRAM |
| Power and PoE | |
| DC Input | 12–55 V DC terminal-block dual input |
| PoE Standards | No PoE output |
| PoE Allocation | Not applicable |
| Maximum Consumption | 14.1 W |
| Standby Consumption | Up to 6.50 W |
| External Supply | Required separately; size for switch and connected load |
| Management and Security | |
| Traffic Segmentation | 802.1Q VLAN, Q-in-Q, Voice VLAN and surveillance VLAN |
| Local Routing | IPv4/IPv6 static routing; up to 10 IP interfaces |
| Resilience | ERPS, STP, RSTP, MSTP and link aggregation |
| QoS and Multicast | 8 queues per port; IGMP/MLD snooping |
| Access Controls | ACL, 802.1X, DHCP snooping, IP-MAC-Port binding and SSH |
| Administration and OAM | Web GUI, CLI, logs, sFlow, cable diagnostics, 802.3ah, 802.1ag and Y.1731 |
| Physical and Environmental | |
| Housing and Mounting | IP40 metal casing; DIN rail; fanless |
| Dimensions (L × W × H) | 164 × 107 × 44 mm |
| Device Weight | 0.72 kg |
| Operating and Storage Temperature | Operating −40°C to 75°C; storage −40°C to 85°C |
| Humidity | Operating and storage 5–95% RH |
| Surge Protection | 6 kV on copper Ethernet ports |
| MTBF | More than 200,000 hours |
| Safety and Emissions | cUL, CB, CE and BSMI; CE/VCCI/FCC Class A, IC and RCM |
| Warranty | 5 years |
Add-ons
