Ubiquiti UACC-Cable-Patch-EL-C6A UniFi CAT6A Premium na Kableng Patch

Braided 10GbE Patching with Clear Port Visibility The Ubiquiti UACC-Cable-Patch-EL-C6A is a slim braided RJ45 patch cable designed for indoor 10GbE connections. It combines a flexible cable profile with translucent connector boots that allow Etherlighting effects from compatible UniFi switch ports to remain visible. Choose a short lead for adjacent rack equipment or a longer cable for a desk, cabinet or nearby device. This listing offers White single cables from 0.15M to 15M and a 0.15M 24-Pack for repeat patch-panel connections. Highlights Supports Ethernet links up to 10GbE. Braided outer finish with translucent RJ45 boots. 3mm outer diameter through 8M and 3.3mm for 12M/15M. Supports PoE up to PoE+++ with compatible equipment. Key Features Choose the Length for the InstallationThe available 0.15M and 0.3M leads help minimise excess cable between adjacent ports. Longer lengths provide flexibility for equipment positioned farther apart. Lengths are measured end to end; allow enough slack for comfortable routing and future servicing. Keep Etherlighting Effects VisibleThe translucent boots are designed to show the light from an Etherlighting-capable switch port. The cable does not generate lighting itself and does not require Etherlighting to carry Ethernet data. Understand the Cable ConstructionThe braided finish surrounds a TPE jacket and stranded copper conductors. Ubiquiti specifies UTP cable construction with shielded RJ45 connectors. Use it for indoor patching and maintain the bend radius appropriate to the selected length. Match the Whole Link to 10GbEActual link speed is limited by the connected ports and the full cabling route. PoE operation also depends on the power source, powered device and cable installation. Select a cable length and pack that suit the job without treating a cable as a power injector. Summary The UACC-Cable-Patch-EL-C6A provides a braided indoor 10GbE patching option with useful Etherlighting visibility. Its length choices suit both compact rack connections and longer indoor runs. Frequently Asked Questions Do I need an Etherlighting switch to use this cable? No. It works as an ordinary RJ45 Ethernet patch cable. An Etherlighting-capable switch is needed for the lighting effect; the translucent boots let the port lighting show through. Will this cable make a Gigabit connection run at 10GbE? No. A cable cannot increase the speed of the connected ports. This family supports up to 10GbE, but both devices and the complete cabling path must support the intended link speed. Can I use it for a PoE access point or camera? Yes, with compatible PoE equipment. Ubiquiti specifies support up to PoE+++. The switch or injector must still provide the PoE standard and power budget required by the device. Is the whole cable shielded because the plugs are shielded? No. Ubiquiti lists shielded RJ45 connectors but UTP cable construction. Choose a cable with the required shielding throughout if your installation needs a fully shielded connection. Can the braided cable be installed outdoors? No. This model is specified for indoor use. Its braided finish does not make it an outdoor cable; choose an outdoor-rated model for exposed runs. Magbasa pa