Marvell QLogic QLE2692 Dual-Port 16GFC Fibre Channel Adapter
Connect a Verified Storage Platform to a Fibre Channel SAN Marvell QLogic QLE2692 provides two 16GFC ports through a PCIe 3.0 x8 interface. This supplied offer includes two short-range optical transceivers for a suitably designed Fibre Channel storage environment. It is a Marvell QLogic adapter, not a Synology-manufactured Ethernet card. Match the exact NAS or server, supported firmware, operating system and SAN configuration before installation. Highlights A Dedicated Fibre Channel Interface 2 × 16GFC SFP+ ports PCIe 3.0 x8 interface Supplied with 2 SR optical transceivers Key Features Use the Right Protocol for the Storage Fabric The QLE2692 is a Fibre Channel host bus adapter. It belongs in a compatible FC SAN design; its SFP+ connectors do not make it an ordinary Ethernet network card or an interchangeable 10GbE interface. Connect Through Two FC Ports Dual interfaces give the storage design two connection points. Any path redundancy or failover depends on the SAN topology, switching, host configuration and supported software, rather than the port count alone. Plan Fibre and Distance with the Included Optics The supplied offer includes two short-range optical transceivers. Select suitable multimode fibre and verify the complete link against the optic, switch, speed and cable category before commissioning. Match the Card to the Host The adapter uses PCIe 3.0 x8 and a low-profile card design. Confirm slot availability, bracket fit, cooling and exact host support. Do not substitute a different OEM or V2 revision without checking the supplied configuration. Use the Firmware Tested for the Synology Platform The current 9.06.02 compatibility record covers the named newer Synology systems, with DSM or DSM Enterprise requirements. Older listed platforms have separate tested firmware and DSM UC conditions. Match the exact record to the installation. Validate the SAN After Installation Install the supported driver and firmware, configure the switch fabric and storage paths, then test access and recovery behaviour before production use. Hardware supply does not include fabric design or installation services. Compatible Synology Models Synology’s tested adapter record identifies the Marvell QLogic QLE2692-SR-CK. Match that exact supplied revision, the host and the tested adapter firmware; the generic QLE2692 name does not establish compatibility for every OEM version. Systems Listed with Adapter Firmware 9.06.02 DSM models require DSM 7.2.1-69057 or later. DSM Enterprise models require DSM Enterprise 1.0-101178 or later. PAS series PAS7700 FS series FS6420, FS3420 SA series SA6400 26 series RS11626xs+, RS6426xs+, RS4826xs+, RS3626xs, RS1626xs+ Systems Listed with Adapter Firmware 8.08.231 DSM models require DSM 7.2.1-69057 or later. DSM UC models require DSM UC 3.1.3-23076 or later. FS series FS6400, FS3600, FS3410, FS3400, FS2500, FS2017, FS1018 HD series HD6500 SA series SA6400, SA3610, SA3600, SA3410, SA3400D, SA3400, SA3200D UC series UC3400, UC3200 23 series DS1823xs+ 22 series DS3622xs+ 21 series RS4021xs+, RS3621xs+, RS3621RPxs, DS1621xs+ 19 series RS1619xs+ 18 series RS3618xs, DS3018xs 17 series RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xsII, DS3617xs Summary QLE2692 gives a supported host a defined dual-port 16GFC connection, including the specified SR optics. Its value comes from a correctly matched FC fabric, host and software stack, with the supplied base model kept distinct from other OEM revisions. Frequently Asked Questions Is This a Synology-Branded Ethernet Card?ExpandCollapse No. The manufacturer is Marvell QLogic and the protocol is Fibre Channel. Synology publishes compatibility records for the applicable adapter and host combinations. What Is Included in This Offer?ExpandCollapse The supplied offer includes a QLE2692 adapter and two SR optical transceivers. Fibre patch cables, FC switches and installation are separate. Confirm chassis bracket requirements before ordering. Which Newer Synology Hosts Are Listed?ExpandCollapse The 9.06.02 record lists PAS7700, FS6420, FS3420, SA6400, RS11626xs+, RS6426xs+, RS4826xs+, RS3626xs and RS1626xs+. Software requirements must also be met. What Software Is Required on Those Hosts?ExpandCollapse DSM-based models require DSM 7.2.1-69057 or later; PAS DSM Enterprise requires 1.0-101178 or later. Use the adapter firmware listed for that exact host. Older DSM UC platforms have a separate compatibility record. Can I Use Ethernet SFP+ Modules Instead of FC Optics?ExpandCollapse Do not assume that matching connector size means matching protocol. Use supported Fibre Channel optics and fibre appropriate to the adapter, switch, required speed and distance. Does It Include a Different OEM or V2 Revision?ExpandCollapse This listing describes the base QLE2692 adapter, with the specified SR optics. It does not promise an unrelated OEM firmware package or a V2 revision. The exact supplied adapter and host must be checked together.
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
Marvell QLogic QLE2692 Dual-Port 16GFC Fibre Channel Adapter
Paglalarawan
Connect a Verified Storage Platform to a Fibre Channel SAN
Marvell QLogic QLE2692 provides two 16GFC ports through a PCIe 3.0 x8 interface. This supplied offer includes two short-range optical transceivers for a suitably designed Fibre Channel storage environment.
It is a Marvell QLogic adapter, not a Synology-manufactured Ethernet card. Match the exact NAS or server, supported firmware, operating system and SAN configuration before installation.
Highlights
A Dedicated Fibre Channel Interface
- 2 × 16GFC SFP+ ports
- PCIe 3.0 x8 interface
- Supplied with 2 SR optical transceivers
Key Features
Use the Right Protocol for the Storage Fabric
The QLE2692 is a Fibre Channel host bus adapter. It belongs in a compatible FC SAN design; its SFP+ connectors do not make it an ordinary Ethernet network card or an interchangeable 10GbE interface.
Connect Through Two FC Ports
Dual interfaces give the storage design two connection points. Any path redundancy or failover depends on the SAN topology, switching, host configuration and supported software, rather than the port count alone.
Plan Fibre and Distance with the Included Optics
The supplied offer includes two short-range optical transceivers. Select suitable multimode fibre and verify the complete link against the optic, switch, speed and cable category before commissioning.
Match the Card to the Host
The adapter uses PCIe 3.0 x8 and a low-profile card design. Confirm slot availability, bracket fit, cooling and exact host support. Do not substitute a different OEM or V2 revision without checking the supplied configuration.
Use the Firmware Tested for the Synology Platform
The current 9.06.02 compatibility record covers the named newer Synology systems, with DSM or DSM Enterprise requirements. Older listed platforms have separate tested firmware and DSM UC conditions. Match the exact record to the installation.
Validate the SAN After Installation
Install the supported driver and firmware, configure the switch fabric and storage paths, then test access and recovery behaviour before production use. Hardware supply does not include fabric design or installation services.
Compatible Synology Models
Synology’s tested adapter record identifies the Marvell QLogic QLE2692-SR-CK. Match that exact supplied revision, the host and the tested adapter firmware; the generic QLE2692 name does not establish compatibility for every OEM version.
Systems Listed with Adapter Firmware 9.06.02
DSM models require DSM 7.2.1-69057 or later. DSM Enterprise models require DSM Enterprise 1.0-101178 or later.
- PAS series PAS7700
- FS series FS6420, FS3420
- SA series SA6400
- 26 series RS11626xs+, RS6426xs+, RS4826xs+, RS3626xs, RS1626xs+
Systems Listed with Adapter Firmware 8.08.231
DSM models require DSM 7.2.1-69057 or later. DSM UC models require DSM UC 3.1.3-23076 or later.
- FS series FS6400, FS3600, FS3410, FS3400, FS2500, FS2017, FS1018
- HD series HD6500
- SA series SA6400, SA3610, SA3600, SA3410, SA3400D, SA3400, SA3200D
- UC series UC3400, UC3200
- 23 series DS1823xs+
- 22 series DS3622xs+
- 21 series RS4021xs+, RS3621xs+, RS3621RPxs, DS1621xs+
- 19 series RS1619xs+
- 18 series RS3618xs, DS3018xs
- 17 series RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xsII, DS3617xs
Summary
QLE2692 gives a supported host a defined dual-port 16GFC connection, including the specified SR optics. Its value comes from a correctly matched FC fabric, host and software stack, with the supplied base model kept distinct from other OEM revisions.
Frequently Asked Questions
Is This a Synology-Branded Ethernet Card?
No. The manufacturer is Marvell QLogic and the protocol is Fibre Channel. Synology publishes compatibility records for the applicable adapter and host combinations.
What Is Included in This Offer?
The supplied offer includes a QLE2692 adapter and two SR optical transceivers. Fibre patch cables, FC switches and installation are separate. Confirm chassis bracket requirements before ordering.
Which Newer Synology Hosts Are Listed?
The 9.06.02 record lists PAS7700, FS6420, FS3420, SA6400, RS11626xs+, RS6426xs+, RS4826xs+, RS3626xs and RS1626xs+. Software requirements must also be met.
What Software Is Required on Those Hosts?
DSM-based models require DSM 7.2.1-69057 or later; PAS DSM Enterprise requires 1.0-101178 or later. Use the adapter firmware listed for that exact host. Older DSM UC platforms have a separate compatibility record.
Can I Use Ethernet SFP+ Modules Instead of FC Optics?
Do not assume that matching connector size means matching protocol. Use supported Fibre Channel optics and fibre appropriate to the adapter, switch, required speed and distance.
Does It Include a Different OEM or V2 Revision?
This listing describes the base QLE2692 adapter, with the specified SR optics. It does not promise an unrelated OEM firmware package or a V2 revision. The exact supplied adapter and host must be checked together.
Mga detalye
Marvell QLogic QLE2692 Dual-Port 16GFC Fibre Channel Adapter
The Marvell QLogic QLE2692 is a dual-port 16GFC Fibre Channel adapter using a PCIe 3.0 x8 host interface. The supplied offer includes two SR optical transceivers and is intended for a compatible FC SAN. Its base model must not be confused with an Ethernet adapter or a different OEM revision. Synology support depends on the exact host, adapter firmware and operating-system version; the newer-platform compatibility record and relevant software requirements are set out below.
| Specification | Details |
|---|---|
| Interface and Protocol | |
| Ports | 2 × 16GFC Fibre Channel |
| Connectors | SFP+ |
| Host Interface | PCIe 3.0 x8 |
| Card Design | Low-profile PCIe card; verify supplied bracket fit |
| Virtualisation | Supported NPIV and FC management features depend on the host and SAN |
| Verified Newer Synology Platforms | |
| PAS and Storage | PAS7700; FS6420; FS3420; SA6400 |
| RackStation | RS11626xs+; RS6426xs+; RS4826xs+; RS3626xs; RS1626xs+ |
| Tested Adapter Firmware | 9.06.02 |
| DSM Requirement | 7.2.1-69057 or later on DSM models |
| DSM Enterprise Requirement | 1.0-101178 or later on DSM Enterprise models |
| Other Platforms | Separately listed older systems use their own tested firmware; applicable DSM UC requirement is 3.1.3-23076 or later |
| Physical and Environment | |
| Card Dimensions | 167.6 × 69.4 mm; low-profile board dimensions |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | −20°C to 70°C |
| Operating Humidity | 10% to 90% |
| Supplied Offer | |
| Included | QLE2692 adapter; 2 SR optical transceivers |
| Fibre and Fabric Hardware | Not included |
| Warranty | 3 Years |
| Revision Scope | Base supplied model; no unverified V2 or OEM revision substitution |