{"product_id":"ubiquiti-usw-industrial-din-8-poe","title":"Ubiquiti UniFi USW-Industrial-DIN-8-PoE 480W DIN Rail Switch","description":"\u003ch2\u003eHigh-Power PoE for Compact Industrial Networks\u003c\/h2\u003e \u003cp\u003eThe Ubiquiti UniFi USW-Industrial-DIN-8-PoE combines eight Gigabit PoE++ ports with two 1G SFP uplinks in a fanless industrial enclosure. It suits cabinet installations that need to carry data and power to compatible Ethernet devices. A maximum 480W total PoE budget supports demanding power plans, provided the external DC supply and connected loads meet the installation requirements. The DC power supply is not included.\u003c\/p\u003e \u003ch2\u003eHighlights\u003c\/h2\u003e \u003ch3\u003eEight High-Power Connections\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight Gigabit PoE++ ports with up to 60W per port by the power sourcing equipment.\u003c\/li\u003e \u003cli\u003eMaximum 480W total PoE budget with a suitable external supply.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eCabinet-Friendly Construction\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDIN rail or wall mounting with left, right or rear DIN attachment positions.\u003c\/li\u003e \u003cli\u003eFanless aluminium enclosure with a −30 to 70°C operating range.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eManaged and Monitored Networking\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo 1G SFP uplinks and UniFi network management.\u003c\/li\u003e \u003cli\u003eDual DC inputs and an integrated alarm relay for external PSU monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eKey Features\u003c\/h2\u003e \u003ch3\u003eSize PoE for the Connected Devices\u003c\/h3\u003e\u003cp\u003eEach PoE++ port supports a maximum 60W output from the switch, with up to 480W shared across all eight ports. Check each device’s required PoE input and the total connected load before installation. These are switch-side limits; power reaching a device depends on the link and its supported PoE negotiation.\u003c\/p\u003e \u003ch3\u003eChoose the Correct External DC Supply\u003c\/h3\u003e\u003cp\u003eFull PoE++ output requires a separate 44–57V DC supply rated 500W or higher. Maximum switch consumption is 12W without PoE loads and 492W including PoE. Select the supply and wiring for the intended load rather than assuming that any DC adapter can deliver the full budget. No DC power supply is included.\u003c\/p\u003e \u003ch3\u003eAdd Power Redundancy and Monitoring\u003c\/h3\u003e\u003cp\u003eTwo DC terminal-block inputs support a redundant power arrangement. An integrated alarm relay enables external PSU monitoring, allowing the installation to include hardware power alerts. Plan the supplies, wiring and alarm connection together for the intended installation.\u003c\/p\u003e \u003ch3\u003eUse Fibre for Appropriate Uplinks\u003c\/h3\u003e\u003cp\u003eThe two 1G SFP ports provide fibre connection options alongside the eight Gigabit copper ports. Select transceivers and fibre that match the remote equipment, link distance and fibre type. These uplinks are 1G interfaces, so this model should be planned as a Gigabit switch rather than a 10G aggregation device.\u003c\/p\u003e \u003ch3\u003eSeparate Equipment and Control Access\u003c\/h3\u003e\u003cp\u003eVLAN support, IP and MAC ACLs, network isolation and port isolation help organise different device groups. 802.1X control, MAC restrictions and DHCP snooping or guarding provide further access controls. Configure these features around the actual devices and policies so that required services remain reachable.\u003c\/p\u003e \u003ch3\u003eManage Links and Traffic\u003c\/h3\u003e\u003cp\u003eLACP supports aggregation of suitable links, while STP, RSTP and loop protection support managed network layouts. IGMP snooping and advanced IGMP functions assist multicast handling. Storm control, traffic rate limits, port mirroring and jumbo frames provide additional tools for traffic control and troubleshooting.\u003c\/p\u003e \u003ch3\u003ePosition the Switch Around the Cabinet\u003c\/h3\u003e\u003cp\u003eThe supplied DIN rail attachment and wall mounting plate support cabinet installation. Left, right or rear DIN attachment options help place ports and cables within constrained spaces. Fanless construction avoids a cooling fan, but installation must still respect the operating temperature and non-condensing humidity limits.\u003c\/p\u003e \u003ch3\u003ePrepare Configuration and Installation Timing\u003c\/h3\u003e\u003cp\u003eUniFi provides configuration and monitoring, with Ethernet and a serial console for management. Plan the management platform, power supply, device power budget and uplink accessories together. Singapore availability and delivery timing are unconfirmed; confirm the delivery arrangement before committing to an installation date.\u003c\/p\u003e \u003ch2\u003eSummary\u003c\/h2\u003e \u003cp\u003eChoose DIN 8-PoE when an industrial cabinet needs managed Gigabit networking and high-power PoE from one compact switch. Its usefulness depends on a properly sized external DC supply, compatible devices and a planned network layout. Confirm Singapore delivery timing before scheduling installation.\u003c\/p\u003e","brand":"Ubiquiti","offers":[{"title":"Default Title","offer_id":44444224421947,"sku":"USW-Industrial-DIN-8-PoE","price":494.65,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/4541\/3179\/files\/ubiquiti-unifi-usw-industrial-din-8-poe-480w-din-rail-switch-9825967.png?v=1791702378","url":"https:\/\/aceperipherals.com\/products\/ubiquiti-usw-industrial-din-8-poe","provider":"ACE Peripherals","version":"1.0","type":"link"}