{"product_id":"ubiquiti-u7-pro-wall","title":"Ubiquiti U7-Pro-Wall BE11000 Access Point","description":"\u003ch2\u003eWall-mounted WiFi 7 that fits the room\u003c\/h2\u003e \u003cp\u003eThe Ubiquiti U7-Pro-Wall provides tri-band WiFi 7 in a rectangular wall-mounted enclosure for offices, reception areas and living spaces. Its six spatial streams and 2.5GbE uplink connect compatible wireless clients to a managed UniFi network. The standard wall mount is included, while matching flush mount and table stand accessories offer optional placement choices.\u003c\/p\u003e \u003ch2\u003eHighlights\u003c\/h2\u003e \u003ch3\u003eTri-band WiFi 7\u003c\/h3\u003e \u003cul\u003e\n\u003cli\u003e2.4GHz, 5GHz and 6GHz radios with six spatial streams.\u003c\/li\u003e\n\u003cli\u003e2 × 2 MU-MIMO on each band, with compatible older WiFi devices supported.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eWired speed and power\u003c\/h3\u003e \u003cul\u003e\n\u003cli\u003e2.5GbE Ethernet uplink for a suitable upstream network.\u003c\/li\u003e\n\u003cli\u003ePoE+ carries power and data through one cable; the injector or switch is separate.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eManaged coverage\u003c\/h3\u003e \u003cul\u003e\n\u003cli\u003ePublished planning figures of 140m² coverage and 300+ connected clients, dependent on the site.\u003c\/li\u003e\n\u003cli\u003eUniFi Network provides coordinated configuration, guest access and radio controls.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eKey Features\u003c\/h2\u003e \u003ch3\u003eUse the appropriate radio band for each device\u003c\/h3\u003e \u003cp\u003eWiFi 7 supports modern clients while the 2.4GHz and 5GHz radios retain connections for compatible older equipment. The 6GHz band gives supported devices another connection option where local regulations permit its use. A client must support the relevant band and features; an older client keeps the capabilities of its own radio.\u003c\/p\u003e \u003ch3\u003eProvide a suitable wired connection\u003c\/h3\u003e \u003cp\u003eThe single 2.5GbE uplink carries traffic back to your wired network. A matching switch and suitable cabling help avoid a slower upstream connection becoming the limiting factor when several fast clients are active. Radio link rates describe the wireless connection. Actual internet and application performance also depend on the gateway, internet service, client equipment and radio conditions.\u003c\/p\u003e \u003ch3\u003ePlan coverage around the actual rooms\u003c\/h3\u003e \u003cp\u003eThe manufacturer’s 140m² and 300+ client figures are planning guidance rather than a guarantee for every building. Walls, metalwork, interference and the traffic generated by each client affect results. Wall placement suits rooms where a ceiling-mounted unit is impractical. Orient the unit as intended and assess neighbouring spaces as part of the coverage design.\u003c\/p\u003e \u003ch3\u003eManage guest and staff access centrally\u003c\/h3\u003e \u003cp\u003eUniFi Network supports guest and client isolation, WiFi schedules, rate limits and a configurable captive portal. PPSK and RADIUS-based VLAN assignment provide further ways to organise supported deployments. Roaming assistance and radio management help coordinate multiple access points. Client compatibility, the management application and configuration determine which features are used.\u003c\/p\u003e \u003ch3\u003eProvide PoE+ power before installation\u003c\/h3\u003e \u003cp\u003ePower and data share one Ethernet cable, simplifying placement when a suitable PoE+ source is available. Allow for the access point’s maximum draw of 22W and the supplying switch’s overall power budget. An injector is not included. A Gigabit injector can supply power but limits the wired connection to Gigabit; use a suitable multi-gigabit PoE source to retain the 2.5GbE uplink.\u003c\/p\u003e \u003ch3\u003eChoose the correct mounting and software\u003c\/h3\u003e \u003cp\u003eThe wall mount is included for the standard installation. Matching flush mount and table stand accessories provide other placement choices and are sold separately. Use UniFi Network 8.1.113 or later. Keep firmware and the management application current, and select radio channels and widths permitted in the installation country.\u003c\/p\u003e \u003ch2\u003eSummary\u003c\/h2\u003e \u003cp\u003eU7-Pro-Wall suits a managed network that needs discreet wall-based WiFi 7 coverage. Match the PoE supply, upstream network and placement to the site’s client and coverage needs.\u003c\/p\u003e","brand":"Ubiquiti","offers":[{"title":"Default Title","offer_id":41741493534779,"sku":"U7-Pro-Wall","price":325.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/4541\/3179\/files\/ubiquiti-u7-pro-wall-be11000-access-point-807268.png?v=1718190971","url":"https:\/\/aceperipherals.com\/products\/ubiquiti-u7-pro-wall","provider":"ACE Peripherals","version":"1.0","type":"link"}