{"product_id":"ubiquiti-u7-industrial","title":"Ubiquiti UniFi U7-Industrial WiFi 7 Outdoor Access Point","description":"\u003ch2\u003eShape outdoor WiFi coverage around your site\u003c\/h2\u003e \u003cp\u003eThe Ubiquiti UniFi U7-Industrial is a dual-band WiFi 7 access point for industrial buildings, outdoor work areas and other sites that need weather protection and a deliberate coverage pattern. Its built-in directional antennas, adjustable reflectors and included omni antennas let you choose between focused coverage and coverage around the mounting point. A single 2.5GbE PoE connection carries both network traffic and power.\u003c\/p\u003e \u003ch2\u003eHighlights\u003c\/h2\u003e \u003ch3\u003eChoose the coverage pattern\u003c\/h3\u003e \u003cul\u003e\n\u003cli\u003eBuilt-in directional antennas for a defined target area.\u003c\/li\u003e\n\u003cli\u003eIncluded adjustable reflector set and external omni antennas.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eBuilt for demanding locations\u003c\/h3\u003e \u003cul\u003e\n\u003cli\u003eIP67 protection when the cable gland is correctly installed.\u003c\/li\u003e\n\u003cli\u003ePublished operating range of −40 to 70°C.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eMulti-Gigabit network connection\u003c\/h3\u003e \u003cul\u003e\n\u003cli\u003e2.5GbE RJ45 uplink with PoE power.\u003c\/li\u003e\n\u003cli\u003eWiFi 7 on 2.4GHz and 5GHz with four spatial streams.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eInstallation flexibility\u003c\/h3\u003e \u003cul\u003e\n\u003cli\u003eWall and pole mounting hardware included.\u003c\/li\u003e\n\u003cli\u003eUniFi management with guest, roaming and network access controls.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eKey Features\u003c\/h2\u003e \u003ch3\u003eAim wireless coverage where it is needed\u003c\/h3\u003e \u003cp\u003eUse the internal directional antennas to serve a particular area rather than radiating equally around the access point. The included reflector panels adjust the horizontal coverage angle and increase antenna gain. Wider positioning covers a broader area; narrower positioning concentrates the pattern. Choose the arrangement after assessing the site layout and neighbouring radios.\u003c\/p\u003e \u003ch3\u003eUse omni antennas for coverage around a pole\u003c\/h3\u003e \u003cp\u003eThe included external omni antennas offer a 360-degree horizontal pattern. They provide an alternative when clients are positioned around the mounting point. Directional and omni figures describe different antenna arrangements; they are not simultaneous coverage guarantees. Choose the appropriate antenna arrangement and orientation for the deployment.\u003c\/p\u003e \u003ch3\u003eMatch WiFi performance to clients and region\u003c\/h3\u003e \u003cp\u003eEach band uses 2×2 MU-MIMO. The published maximum rates are 4.3Gbps on 5GHz at 240MHz and 688Mbps on 2.4GHz at 40MHz. These are radio link rates rather than guaranteed application throughput. Permitted channel widths depend on the regulatory region, and this model does not provide a 6GHz radio.\u003c\/p\u003e \u003ch3\u003ePlan a suitable PoE connection\u003c\/h3\u003e \u003cp\u003eThe Ethernet port supports a 2.5GbE uplink and PoE power, with maximum device consumption of 13W. Use a suitable PoE switch or injector; a compatible 2.5G injector preserves the faster wired connection. Check the temperature ratings of the power source, cable and protection accessories separately.\u003c\/p\u003e \u003ch3\u003eInstall the weather seal and mounting hardware correctly\u003c\/h3\u003e \u003cp\u003eIP67 protection depends on correct cable gland installation. The ball mount supports positioning on a wall or a pole measuring 25–63.5mm in diameter. Allow space for the selected reflector or omni arrangement, which changes the overall dimensions, and plan mounting and cable routing for the installation conditions.\u003c\/p\u003e \u003ch3\u003eManage access and roaming through UniFi\u003c\/h3\u003e \u003cp\u003eUniFi supports wireless meshing, band steering and 802.11k\/v\/r roaming functions. Guest and client isolation, PPSK, WiFi schedules and RADIUS-assigned VLANs help organise access for different users. Real-time spectral analysis supports channel selection; results still depend on the local RF environment and network configuration.\u003c\/p\u003e \u003ch3\u003eConfirm software and Singapore supply before deployment\u003c\/h3\u003e \u003cp\u003eInitial support requires UniFi Network 11 RC and access point firmware 8.8.12. Confirm the availability and compatibility of those software releases before installation. Singapore pre-order delivery timing and the supplied regional model remain subject to confirmation.\u003c\/p\u003e \u003ch2\u003eSummary\u003c\/h2\u003e \u003cp\u003eChoose U7-Industrial for outdoor or industrial WiFi where coverage direction, environmental protection and mounting flexibility matter. Match the included antenna configuration, PoE source and compatible UniFi software to the site before deployment.\u003c\/p\u003e","brand":"Ubiquiti","offers":[{"title":"Default Title","offer_id":44444226224187,"sku":"U7-Industrial","price":524.72,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/4541\/3179\/files\/ubiquiti-unifi-u7-industrial-wifi-7-outdoor-access-point-9005276.png?v=1791702375","url":"https:\/\/aceperipherals.com\/products\/ubiquiti-u7-industrial","provider":"ACE Peripherals","version":"1.0","type":"link"}